Ajax FireProtect 2 SB (Heat) Jeweller

Overview

The Ajax FireProtect 2 SB (Heat) Jeweller is a heat alarm that sounds its built-in 85 dB siren and alerts your Ajax system when the temperature becomes dangerous. It has no smoke sensor, so it suits rooms where smoke, steam or dust would give a smoke alarm false alarms. Its batteries are sealed and rated for 10 years, so there is nothing to change.

Is it right for you?

• Choose it for a room where a smoke alarm would give false alarms and heat detection is enough.
• It does not detect smoke. For bedrooms and living rooms, a FireProtect 2 model with a smoke sensor is the better choice.
• Sealed batteries mean no battery changes for the life of the detector; if you prefer replaceable batteries, see the RB models.
• Hub (2G) Jeweller is not on its compatibility list; it is listed for Hub (4G), Hub Plus, Hub 2, Hub 2 Plus, ReX and ReX 2 among others.

Key features

• Heat sensor meeting the requirements for Class A1R heat detectors under EN 54-5 and BS 5446-2.
• Alarm when the temperature rises above 64 °C, or by more than 10 °C within 1 minute.
• Built-in siren at 85 dB at 3 m, sounding until the cause is cleared or the user silences it.
• Interconnected alarm through the hub within 20 seconds, plus a fallback link detector to detector that sounds every connected detector within a minute even if the hub is lost (firmware 5.59.2.XX or later, marked on the package).
• LED indication: green every 56 seconds for power, yellow for faults such as low battery, red for a fire alarm.
• Front button runs a self-test in normal mode and silences the siren during an alarm or fault.
• Jeweller radio to the hub or range extender up to 1,700 m in open space, encrypted with frequency hopping.
• Two sealed lithium batteries rated for 10 years; 44 x 86 x 86 mm, 142 g.

What else you need

An Ajax hub. Compatible hubs and range extenders include Hub (4G), Hub Plus, Hub 2 (2G), Hub 2 (4G), Hub 2 Plus, Hub BP, ReX, ReX 2, Superior Hub G3, Superior Hub Hybrid, Superior Hub Hybrid 2, Superior MegaHub and Superior ReX G3.

The Ajax app, where alerts arrive and the detector is managed.

Installation

An Ajax installer can fit it with the SmartBracket mounting panel, which allows the detector’s position to be adjusted after installation, and add it in the app. It is for indoor use.

Before you buy

Indoor use only, from 0 to 50 °C and up to 80% humidity, IP20.

The self-test is not available while the detector is in an alarm state.

Communication loss is detected within 15 minutes; the polling interval is fixed at 300 seconds.

Fallback interconnection needs firmware 5.59.2.XX or later; supporting units carry a Fallback interconnect supported label on the package.