Ajax Hub 2 Plus Jeweller

Overview

The Ajax Hub 2 Plus Jeweller is the control panel for larger Ajax wireless alarms, with photo verification from MotionCam detectors so you can see what set off an alarm. It links up to 200 devices over the Jeweller radio and connects to the internet over Wi-Fi, Ethernet and two SIM cards that work on 2G, 3G or 4G (LTE), with a 3 Ah backup battery for power cuts. It suits large homes, offices, shops with several areas and small commercial buildings.

Is it right for you?

• Choose it when you need more than 100 devices, more than 50 users or more than 9 security groups, or when you want Wi-Fi and 4G.
• Up to 25 security groups let different areas, floors or tenants be armed separately.
• For a smaller home or shop, Hub 2 (2G) gives photo verification at a lower capacity.

Key features

• Up to 200 wireless Ajax devices, including up to 10 sirens or keypads with a built-in siren and 5 range extenders; up to 200 users, 25 security groups and 50 rooms.
• Photo verification over the Wings radio: photo on alarm, by scenario, on demand or by schedule, up to 640 x 480 pixels, 1 to 5 photos in a series, delivered in up to 9 s by default.
• Four internet channels working in parallel: Ethernet (up to 100 Mbps), Wi-Fi 802.11 b/g/n, and two micro-SIM slots for 2G, 3G and 4G (LTE). Switching between Ethernet, Wi-Fi and SIM is instant; switching between SIMs takes up to 4 minutes.
• Push notifications, SMS and calls, configured per user.
• Reports to monitoring stations over SIA (DC-09), SurGard (Contact ID), ADEMCO 685 and other protocols, including photo verification.
• Up to 64 automation scenarios, including reactions to temperature, humidity, CO2 and Button presses.
• Jeweller radio up to 2,000 m and Wings radio up to 1,700 m in open space, encrypted with frequency hopping.
• Mains powered from 110 to 240 V, up to 10 W, with a built-in 3 Ah backup battery for up to 15 hours with Ethernet disconnected.

What else you need

Ajax detectors, keypads and sirens; MotionCam detectors if you want photos.

A mains socket, and an Ethernet connection or Wi-Fi network for the wired or wireless link.

One or two micro-SIM cards with data plans. A SIM card is in the box in some sales regions.

To run from DC instead of mains, the 6 V PSU (type A) or 12 to 24 V PSU (type A), sold separately.

The Ajax app, with PRO accounts for installers and monitoring companies.

Installation

An Ajax installer can survey the building, fix the SmartBracket mounting panel, connect power and network, insert the SIMs and add every device in the Ajax app. The hub is for indoor use only.

Software and licences

The Ajax app controls the system, manages users and sets scenarios. Photo by schedule needs hub firmware OS Malevich 2.19 or later.

Pressing Forget this network in the app deletes the saved Wi-Fi settings and the hub no longer connects to that network.

Before you buy

Indoor use only, from -10 to 40 °C and up to 75% humidity, IP20.

The hub has a 3-pin battery; use the same type when replacing it.

The starter pack is not available in all countries.

163 x 163 x 36 mm, 367 g, in black or white.