Ajax KeyPad Jeweller Wireless Touch Keypad for Ajax Alarm Systems

Overview

The Ajax KeyPad Jeweller is a wireless touch keypad that sits by the entrance so people can arm and disarm an Ajax alarm with a code instead of a phone. It gives each user their own code and a duress code for emergencies, and locks itself after repeated wrong entries. It suits homes, shops and offices where several people come and go and not all of them want the app.

Is it right for you?

• It suits an indoor entrance hall or back door in a home, shop or office on an Ajax system.
• It is indoor only (-10 to 40 °C, up to 75% humidity); it is not for an outside wall or porch.
• Codes only: if you want people to tap a card or fob instead of typing, look at the KeyPad Plus or KeyPad TouchScreen.
• It works with Hub (2G), Hub (4G), Hub Plus, Hub 2, Hub 2 (4G), Hub 2 Plus and the ReX and ReX 2 range extenders.

Key features

• Capacitive touch keys with LED indication of the security mode, detector problems and loss of connection to the hub.
• Up to 200 personal codes and one keypad code, with the same again as duress codes that disarm the system and silently raise an alarm; up to 99 codes for people not registered in the system. Code counts depend on the hub model.
• Group security: enter the keypad code and a group ID to arm or disarm one area.
• Function button that can raise an alarm or mute interconnected fire detector alarms, or be switched off.
• Code guessing protection: it locks for 3 to 180 minutes after more than 3 wrong codes within 1 minute; the lock time is set in the app.
• Tamper alarm on removal from the wall or the SmartBracket panel, and communication loss detection after 36 s.
• Four AAA batteries, pre-installed, with a calculated life of up to 2 years.
• Jeweller two-way radio with encryption and frequency hopping, up to 1,700 m to the hub or range extender in open space.

What else you need

An Ajax hub or range extender from the compatible list and the Ajax app to create user and keypad codes. Nothing else: it runs on its own batteries.

Installation

Mount it indoors on the SmartBracket mounting panel near the door, with the installation kit supplied. An Ajax installer can position it, add it to the hub and set codes and lock times in the app.

Software and licences

User codes, duress codes, the function button mode and the lock time are set in the Ajax app by an administrator or an Ajax PRO.

Before you buy

• Indoor use only.
• Choose black or white; the keypad is 150 × 103 × 14 mm.
• The number of personal and unregistered codes depends on your hub model.