Ajax MotionProtect Outdoor Jeweller wireless outdoor motion detector, up to 15 m

Overview

The Ajax MotionProtect Outdoor Jeweller is a wireless outdoor motion detector that raises the Ajax alarm when someone approaches the building, before they reach a door or window. Two infrared sensors and the LISA and SmartDetect software tell people apart from swaying branches, warm air and animals up to 80 cm tall. It suits gardens, yards, car parks and the outside of shops and offices on an Ajax system.

Is it right for you?

• It suits an outside wall of a home, shop or warehouse with a clear view across the approach path.
• Choose it where dogs or other animals up to 80 cm tall roam; taller animals will be detected.
• It is rated IP55 for -25 to 60 °C and can run on batteries alone or with an optional 5 to 28 V DC supply.
• If you want a photo of what triggered the alarm, the MotionCam Outdoor adds a camera.

Key features

• Two passive infrared (PIR) sensors with a 90° horizontal view and adjustable range of 3 to 15 m, set with a scrollbar on the enclosure.
• Detects movement at 0.3 to 2 m/s with three sensitivity levels set in the Ajax app.
• Pet immunity for animals up to 80 cm tall, with LISA and SmartDetect algorithms and temperature compensation across -25 to 60 °C.
• Anti-masking detects attempts to block the view, and a tamper alarm reports removal from the SmartBracket; communication loss is detected after 36 s.
• Two CR123A batteries, pre-installed, with a calculated life of up to 5 years; they become the backup if a 5 to 28 V DC supply (from 200 mA) is connected.
• Jeweller two-way radio with encryption and frequency hopping, up to 1,700 m to the hub or range extender in open space.
• 183 × 70 × 65 mm, 322 g, white.

What else you need

An Ajax hub or range extender and the Ajax app. Optional: a 5 to 28 V DC supply if you want mains power with the batteries as backup, and the Ajax Hood to keep rain and snow off the anti-masking system.

Installation

Mount it at 0.8 to 1.3 m above ground on the SmartBracket panel, lens facing across the path of approach, and set the range scrollbar. Fit a Hood to protect the anti-masking system from rain and snow. An Ajax installer can survey the area, position it and add it to the hub.

Software and licences

Sensitivity and anti-masking settings are managed in the Ajax app.

Before you buy

• When the batteries are completely discharged, the detector stops detecting motion and sending alarms, so act on low battery warnings.
• Range and pet immunity figures assume mounting at 0.8 to 1.3 m.
• Available in white.