Ajax Socket (type F) Jeweller Wireless Smart Plug with Energy Monitoring

Overview

The Ajax Socket (type F) Jeweller is a smart plug for an Ajax system. Plug it into a wall socket, plug an appliance into it, and you can switch that appliance on or off from the Ajax app, by schedule or by alarm, and see how much energy it uses. It suits lamps, heaters, pumps and office equipment in homes and small businesses that already run an Ajax hub.

Is it right for you?

• It suits a home or office on an Ajax system that wants to switch an appliance remotely and track its consumption, without rewiring.
• It has a type F plug and socket, so check that your wall sockets and appliance plugs are type F before ordering.
• It is indoor only (IP20, 0 to 40 °C) for loads up to 2.5 kW at 230 V.
• If the device you want to control is wired in rather than plugged in, the WallSwitch relay fits behind a switch plate instead.

Key features

• Switches a plugged-in appliance from the Ajax app or by scenario: on arming or disarming, by schedule, by alarm, by temperature, by humidity or CO2 level (with LifeQuality on the system), or by pressing a Button or touching a LightSwitch.
• Energy monitor showing current, voltage, power and energy consumed, with a colour LED frame that reflects the state and load; brightness can be adjusted or turned off.
• 110 to 230 V AC, 50/60 Hz, with up to 2.5 kW resistive load at 230 V or 1.2 kW at 110 V; maximum continuous current 11 A, 13 A for up to 5 s.
• Protection that switches the plug off on overcurrent (above 11 A with current protection on, 13 A with it off), on mains voltage outside 184 to 253 V at 230 V, and on overheating above 85 °C.
• Pulse mode (1 to 255 s) or bistable mode, with normally open or normally closed contact state, on firmware 5.54.1.0 or later made after 4 March 2020.
• Childproof internal shutters that stop objects being pushed into the socket and keep out dust and splashes.
• Class I electric shock protection with an earth terminal, and consumption of up to 1 W itself.
• Jeweller two-way radio, up to 1,000 m to the hub or range extender in open space, with communication loss detection after 36 s; 58 g, in black or white.

What else you need

An Ajax hub or range extender and the Ajax app, plus a type F wall socket on 110 to 230 V mains. Scenarios by humidity and CO2 need a LifeQuality on the system.

Installation

Plug it into a type F wall socket indoors and add it to the hub in the Ajax app. A professional electrician should install the device.

Software and licences

Switching, scenarios, energy readings, protection settings and LED brightness are managed in the Ajax app.

Before you buy

• Type F plug and socket only.
• Indoor use only, 0 to 40 °C, up to 75% humidity without condensation.
• Appliances that draw more than 11 A continuously will trip the current protection.
• Choose black or white.