Ajax StreetSiren DoubleDeck Jeweller wireless outdoor siren, branded faceplate mount

Overview

The Ajax StreetSiren DoubleDeck Jeweller is a wireless outdoor siren with a clip lock on the front for a Brandplate, a faceplate printed with a security company’s or installer’s logo and contact details. When your Ajax alarm is triggered it sounds at up to 113 dB and lights its LED, and it also signals entry and exit delays and arming. It suits houses, shops and offices whose installer or monitoring company wants their branding on the wall.

Is it right for you?

• It suits a monitored home or business where the security provider wants a visible branded siren.
• It is rated IP54 for -25 to 60 °C for indoor and outdoor use.
• If you do not need a branded faceplate, the standard StreetSiren does the same job.
• Choose it if you want to run it on batteries alone or add a 12 V DC supply with the batteries as backup.

Key features

• Clip lock for a Brandplate faceplate on which security providers print their logo and contact information; a design can be composed in the Brandplate constructor.
• Buzzer and LED, with volume adjustable from 85 to 113 dB at 1 m in the Ajax app.
• Alarm duration from 3 s to 3 min, or up to 15 minutes with firmware NA 5.60.4.14 or later at Quiet or Loud volume.
• Indicates alarms, entry and exit delays, security mode and mode changes, plus after-alarm indication, and can chime when opening detectors trigger while disarmed.
• Tamper alarm on opening the enclosure and an accelerometer alarm on attempts to move, shake or detach it.
• Four CR123A batteries, pre-installed, with a calculated life of up to 5 years, or a 12 V DC supply (6 to 20 V DC) with the batteries as backup.
• Jeweller radio up to 1,500 m and Wings radio up to 900 m in open space, with communication loss detection after 36 s.
• Type X warning device under EN 50131-6; 200 × 200 × 55 mm, 485 g, in black or white.

What else you need

An Ajax hub or range extender and the Ajax app. The Brandplate faceplate is sold separately from the siren. Optional: a 12 V DC supply (6 to 20 V DC) for mains power with the batteries as backup.

Installation

Mount it on the SmartBracket panel at 2.5 m or higher, indoors or outdoors. Clip the Brandplate into the front. If external power is used, an installer runs a 12 V DC feed. An Ajax installer can position it, add it to the hub and set volume and duration.

Software and licences

Volume, alarm duration, indication and chime are set in the Ajax app by an administrator or an Ajax PRO.

Before you buy

• The Brandplate is a separate item ordered through an Ajax partner; the siren ships without it.
• Alarm duration above 3 minutes needs firmware NA 5.60.4.14 or later and the Quiet or Loud volume setting.
• Choose black or white.