Ajax StreetSiren Jeweller wireless indoor and outdoor siren, 85 to 113 dB

Overview

The Ajax StreetSiren Jeweller is a wireless siren for the outside or inside of a building. When your Ajax alarm is triggered it sounds at up to 113 dB and lights its LED frame, so neighbours and passers-by notice, and it also signals entry and exit delays and arming. It suits houses, shops and offices on an Ajax system that want a visible, loud deterrent on the wall.

Is it right for you?

• It suits an outside wall of a home, shop or office, high up where it can be seen and heard.
• It is rated IP54 for -25 to 60 °C, so it copes with rain and sun.
• Choose it if you want to run it on batteries alone or add a 12 V DC supply with the batteries as backup.
• If you want a faceplate with your installer’s or security company’s logo, the StreetSiren DoubleDeck has a clip lock for a Brandplate.

Key features

• Buzzer and LED frame, with volume adjustable from 85 to 113 dB at 1 m in the Ajax app.
• Alarm duration from 3 s to 3 min, or up to 15 minutes with firmware NA 5.60.4.14 or later at Quiet or Loud volume.
• Indicates alarms, entry and exit delays, security mode and mode changes, plus after-alarm indication, and can chime when opening detectors trigger while disarmed.
• Tamper alarm on opening the enclosure and an accelerometer alarm on attempts to move, shake or detach it.
• Four CR123A batteries, pre-installed, with a calculated life of up to 5 years, or a 12 V DC supply (6 to 20 V DC) with the batteries as backup.
• Jeweller radio up to 1,500 m and Wings radio up to 900 m to the hub or range extender in open space, with communication loss detection after 36 s.
• Type X warning device under EN 50131-6: external, self-powered, with a remote power source.
• 200 × 200 × 51 mm, 528 g, in black or white.

What else you need

An Ajax hub or range extender and the Ajax app. Optional: a 12 V DC supply (6 to 20 V DC, nominal 12 V) if you want mains power with the batteries as backup.

Installation

Mount it on the SmartBracket panel at 2.5 m or higher, indoors or outdoors, with the supplied installation kit. If external power is used, an installer runs a 12 V DC feed to the siren. An Ajax installer can position it, add it to the hub and set volume and duration.

Software and licences

Volume, alarm duration, indication and chime are set in the Ajax app by an administrator or an Ajax PRO.

Before you buy

• Alarm duration above 3 minutes needs firmware NA 5.60.4.14 or later and the Quiet or Loud volume setting.
• Choose black or white.
• The accelerometer alarm reacts to shaking and moving, so fix it to a solid surface.