Armatura OMNIAC30[RNI] 5-inch Face and Palm Access Terminal, PoE, IP66

Overview

The Armatura OmniAC30[RNI] is a door terminal with a 5 inch touchscreen that opens a door by face or palm, with cards and QR codes as a fallback, for office receptions, labs and lobbies. The larger screen helps where visitors need guidance or want to call the front desk by video intercom, and the IP66 housing suits outdoor doors as well.

It can be powered over the network cable (PoE) or from a 12 to 24 V DC supply. This version is fitted with the [RNI] card module.

Is it right for you?

• Suits new office fit-outs and IT rooms, where one network cable can power and connect the terminal at the door.
• It controls one door. For several doors managed together, pair terminals with an Armatura AHDU controller.
• Choose it over the OmniAC20 when you want the bigger screen or PoE power.
• Choose this version when your existing cards match the [RNI] card module. If you want phone credentials, choose the RNPB or RNIB version.

Key features

• Face recognition in under 100 ms and palm recognition in under 140 ms, each with liveness detection, plus mask detection.
• Face recognition from 40 to 140 cm with dual camera liveness, or 40 to 200 cm with single camera liveness; palm recognition from 18 to 40 cm, with 5,000 palms for 1:N matching.
• Reads 125 kHz and 13.56 MHz cards (ISO 14443 A and B, JIS X6319, ISO 15693) at up to 50 mm and scans Armatura ID and static QR codes. Bluetooth phone credentials need the RNPB or RNIB version.
• 5 inch touchscreen (720 x 1280), speaker and microphone, and SIP v2.0 video intercom.
• Power over Ethernet (PoE) IEEE 802.3at at up to 12 W, or 12 to 24 V DC at up to 10 W.
• 2 relays (1 A at 30 V DC), Wiegand in and out, exit button, door sensor and four auxiliary inputs, and OSDP RS-485 for one extra reader.
• 10/100 Ethernet with TLS 1.2 to the server and AES128 to OSDP readers and panels.
• 1,000,000 event records, 99 access groups, magnetic tamper detection and IP66 weather protection.
• 97 x 209 mm front, for a single-gang, European or Asian back box; CE, FCC and RoHS, with ISO/IEC 19795-2 for palm recognition.

What else you need

An IEEE 802.3at PoE switch port, or a 12 to 24 V DC supply (12 V DC at 3 A or 24 V DC at 1.5 A).

An electric lock, a lock power supply and an exit button, plus a door sensor (door position sensor) if you want door held or forced alarms.

A network connection if you want to manage it from Armatura One or use the video intercom.

Installation

An access control installer should fit it. Mount it at about 1.4 m with the tilted plate, or 1.5 m with the flat plate, on a single-gang, European or Asian back box. The job involves connecting PoE or the DC supply, wiring the lock, exit button and door sensor, connecting the network, and enrolling users.

Software and licences

Runs standalone or managed in Armatura One, with the Armatura ICS app for video intercom. It can pass credentials to an Armatura AHDU controller or a third-party panel over Wiegand or OSDP. The Armatura ID app provides QR codes; Bluetooth phone credentials need the RNPB or RNIB version.

Before you buy

• Card compatibility depends on the [RNI] module, so tell us the card technology you use.
• Units released before June 2025 have 1 GB RAM and 8 GB flash; later hardware has 2 GB and 16 GB.
• It controls one door.