Benincà BRAINY Control Unit for Swing Gates, 230 V, 1 or 2 Motors, Built-in Receiver

Overview

The Benincà BRAINY is a 230 V AC control unit for one or two gate operators. It tells the motors when to open and close, reads the remotes through its built-in receiver, and stops or reverses the gate when a safety device is triggered.

Is it right for you?

It suits swing gates with 230 V AC operators such as the BOB21M, BOB30M, BOB50M, DU.IT14N or DU.350N. It also works with opposed sliding gates, hydraulic operators and industrial folding doors.

Key features

• Drives 1 or 2 motors, 600 W + 600 W at 230 V AC
• Built-in LCD display for setting up
• Built-in 433.92 MHz receiver, 64 codes, with Advanced Rolling Code, rolling code and fixed code
• Automatic, semi-automatic and hold-to-run (deadman) modes
• Separate photocell inputs for opening and closing, input for N.C. or 8K2 safety edge
• Encoder input for obstacle detection, separate limit switch inputs per motor
• Outputs for a 230 V AC or 12 V AC/DC electric lock, flashing light, gate open light and courtesy light
• Separate torque adjustment per motor, adjustable slow-downs, programming password and maintenance warning

What else you need

• One or two 230 V AC gate operators
• Remotes, photocells and a flashing light
• An outdoor location near the gate, protected from direct water

Installation

Installation and set-up should be done by a trained installer.

Before you buy

• For more features (512 codes, configurable inputs, smart home links), Benincà also makes the BRAINY PLUS.
• Standby power use meets EU Regulation 2023/826.