Benincà BULL624 TURBO Sliding Gate Operator, 24 V, Gates up to 600 kg, High Speed

Overview

The Benincà BULL624 TURBO is a 24 V DC motor operator for sliding gates that run on a ground track. It sits beside the gate on a foundation plate and drives the gate through a toothed rack fixed along the gate. The control unit and radio receiver are built in.

Is it right for you?

It suits homes and buildings that need a fast gate with sliding gates up to 600 kg.

Key features

• Built-in control unit and radio receiver, so no separate control box is needed
• Maximum gate weight 600 kg, maximum thrust 330 N
• Opening speed 12.5 to 25.5 m/min
• Duty cycle: 60%
• Fast: up to 25.5 m/min with a 600 kg gate
• Virtual encoder and STC system for slow-downs and anti-crush safety
• Safety sensor cuts motor power during manual release
• Works from -20 to 50 °C

What else you need

• A rack along the gate: RI.M4F (M4 rack), enough length for the full gate
• Photocells (FTC.S or PUPILLA) and a flashing light such as IRI.LAMP-Y
• Remotes, for example TO.GO2VA
• A concrete base for the foundation plate, and mains power at the motor

Installation

The motor is bolted to a foundation plate set in concrete, and the rack is fixed to the gate so it meshes with the drive pinion (M4 Z18). Fitting and safety set-up should be done by a trained installer.

Before you buy

• The rack is not included.
• Protection rating IP44.
• Optional batteries fit inside the motor, so the gate keeps working in a power cut (not with the SE.MODULE).
• Standby power use meets EU Regulation 2023/826 when fitted with the SE.MODULE module.