At a glance
- Maximum gate weight
- 800 kg
- Maximum thrust
- 940 N
- Opening speed
- 10.5 m/min
- Duty cycle
- 40%
- Motor supply
- 230 V AC
In the box
- Reinforced foundation plate (Dima)
Model BULL8 OMCurrent modelBenincà BULL8 OM Sliding Gate Operator, 230 V, Gates up to 800 kg, Oil Bath
₹80,535 Incl. GST
₹68,250 + 18% GST
At a glance
- Maximum gate weight
- 800 kg
- Maximum thrust
- 940 N
- Opening speed
- 10.5 m/min
- Duty cycle
- 40%
- Motor supply
- 230 V AC
A sliding gate motor with built-in control unit and receiver, for homes, offices and commercial buildings with frequent use with gates up to 800 kg. 230 V AC, 940 N thrust, 10.5 m/min. Add a rack, photocells and remotes.
- WarrantyManufacturer warranty under Benincà's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The Benincà BULL8 OM is a 230 V AC operator for sliding gates that run on a ground track. It sits beside the gate on a foundation plate and drives the gate through a toothed rack fixed along the gate. The control unit and radio receiver are built in.
Is it right for you?
It suits homes, offices and commercial buildings with frequent use with sliding gates up to 800 kg.
Key features
- Built-in control unit and radio receiver, so no separate control box is needed
- Maximum gate weight 800 kg, maximum thrust 940 N
- Opening speed 10.5 m/min
- Duty cycle: 40%
- Metal gears in an oil bath for longer gear life, also at low temperatures
- Encoder for anti-crush safety and accurate stopping
- Works from -20 to 50 °C
What else you need
- A rack along the gate: RI.M4F (M4 rack), enough length for the full gate
- Photocells (FTC.S or PUPILLA) and a flashing light such as IRI.LAMP-Y
- Remotes, for example TO.GO2VA
- A concrete base for the foundation plate, and mains power at the motor
Installation
The motor is bolted to a foundation plate set in concrete, and the rack is fixed to the gate so it meshes with the drive pinion (M4 Z18). Fitting and safety set-up should be done by a trained installer.
Before you buy
- The rack is not included.
- Protection rating IP44.
- Standby power use meets EU Regulation 2023/826 when fitted with the SE.MODULE module.
Technical specifications
Key facts
- What is it?
- Gate AutomationBrand Benincà, model BULL8 OM
- How is it powered?
- 230 V AC, 50/60 Hz
- Can it be used outdoors?
- IP44
- What comes in the box?
- Reinforced foundation plate (Dima)
- Can SecurityGearHub help with installation?
- Setup guidanceManuals, wiring guides and answers to setup questions. On-site work is arranged separately where available. Ask about installation
- Which documents are available?
- On request. Ask us for the datasheet.
RelatedGuideGate motor buying guideDocumentsAll Benincà documents
- Intended use
- Commercial
- Mains supply
- 230 V AC, 50/60 Hz
- Motor supply
- 230 V AC
- Maximum current draw
- 2.6 A
- Maximum thrust
- 940 N
- Opening speed
- 10.5 m/min
- Duty cycle
- 40%
- Protection rating
- IP44
- Built-in control unit
- Yes
- Built-in radio receiver
- Yes
- Encoder
- Yes
- Virtual encoder
- No
- Magnetic limit switches
- No
- Drive pinion
- M4 Z18
- Operating temperature
- -20 to 50 °C
- Gear lubrication
- Oil
- Maximum gate weight
- 800 kg
- Operator weight
- 14.6 kg
- Warranty
- Manufacturer warranty under Benincà's terms. How claims work
Questions about this product
How heavy a gate can it move?
Up to 800 kg.
Do I need a separate control box?
No. The control unit and radio receiver are built into the motor.
Is the rack included?
No. Order RI.M4F (M4 rack) for the length of your gate.
What happens in a power cut?
The gate can be released and moved by hand. Battery backup is not stated by the manufacturer.
Ask about this modelGate sizing, power, accessories
Answers are automated. Do not enter personal or account details.
Looking for an alternative?
We list alternatives only when we have checked they suit the same job. Compare other models in the category, or ask us to suggest one for your site.