Benincà KIT FREEDOM Sliding Gate Kit, 24 V, Gates up to 400 kg

Overview

The Benincà FREEDOM kit, from the BYOU range, has the main parts needed to automate a sliding gate at a home. The operator has a 24 V DC motor and a built-in CP.FDM control unit with radio receiver, and moves the gate through a rack fixed along the gate.

Is it right for you?

It suits homes with a sliding gate of up to 400 kg. For a gate over 300 kg, the installer turns off the slow-down function and adjusts the motor thrust, as the installation manual describes.

What is in the kit

• FREEDOM operator with built-in control unit and foundation plate
• 1 pair of P.BY photocells
• F.BY flashing light with built-in aerial
• K.BY key selector
• 2 BY 4-button remotes
• 2 end-of-travel brackets for the rack, release keys, anchor bolts with nuts and washers, and fixing screws for the accessories

What else you need

• A rack along the gate, sold separately, enough for the full gate length
• A concrete base for the foundation plate and mains power (230 V AC) at the operator
• Cables for the accessories, which are not supplied
• The optional CB.BY battery kit if the gate should keep working in a power cut

Installation

A trained installer should fit the kit, set the end-of-travel brackets on the rack and test the photocells and other safety devices.

Before you buy

• The rack is not included.
• The manufacturer notes that kit contents may change.