Benincà SR1.60E Rolling Shutter Operator, 230 V, with Brake, up to 170 kg

Overview

The Benincà SR1.60E is a 230 V AC electromechanical operator for balanced rolling shutters, from the SUPERBE range made by the Benincà group under its CAB brand. It has one motor, an aluminium crown gear and the SRE.X1 electric brake, which holds the shutter when the motor stops.

Is it right for you?

It suits shops, garages and small warehouses with a balanced rolling shutter of up to 170 kg and 22 m², with up to 8 m of travel. For a heavier shutter, look at the SR2.60SE (up to 320 kg).

Key features

• 230 V AC, 50/60 Hz, maximum current 3.1 A
• Maximum torque 170 Nm
• SRE.X1 electric brake fitted
• Automatic limit switch that learns the open and closed positions
• Technopolymer flange that spreads the load from the shutter
• Fits a 60 mm shutter shaft, or a 42 or 48 mm shaft with the KSR60.42 or KSR60.48 kit
• For 200 or 220 mm pulleys

What else you need

• A 230 V AC control unit such as the DREAMY
• A KSR60.48 reduction kit if the shutter shaft is 48 mm
• A BL.BS control and release unit, so the shutter can be moved by hand in a power cut
• Remotes that work with the control unit’s receiver

Installation

The motor goes inside the shutter tube: a hole is drilled through the tube, the motor is slid in and then fixed. A trained installer should fit it and set it up.

Before you buy

• Protection rating IPX0, so the motor must be fitted where it is sheltered from water.
• The 4 m motor cable comes with the SR1.60EC version, not with the SR1.60E.