Fanvil LINKVIL W712 RoIP Gateway, Two-Way Radio to SIP, UHF 400 to 470 MHz, PoE

Overview

The Fanvil LINKVIL W712 is a radio over IP (RoIP) gateway. It connects analogue and DMR digital two-way radios with SIP phones, so a guard on a radio can talk to a desk phone or reception without changing your existing radios.

Is it right for you?

Choose the W712 if your security, maintenance or floor teams use two-way radios and you want them reachable from your office phone system. It suits residential security, industrial parks, supermarkets, hotels and campuses. Radio range is about 1 to 3 km in open urban areas, depending on the surroundings.

Key features

• Built-in UHF 400 to 470 MHz radio module for analogue and DMR digital radios
• Works with Motorola, Hytera and other mainstream radios
• 2 SIP lines and SIP hotspot
• Records radio and SIP calls, with 600 call logs
• HD audio with G.722 and Opus
• TF card slot (up to 128 GB) and USB 2.0 port for recordings and upgrades
• Two 10/100 Mbps network ports
• Powered by 12 V DC or PoE (802.3at)
• Web management

What else you need

• Two-way radios on a matching UHF frequency
• A SIP phone system (IP PBX) or SIP phones
• A TF card or USB drive if you want to store recordings
• A PoE+ (802.3at) switch port or the 12 V adapter

Installation

Place it on a desk or mount it on a wall where the radio signal is good, connect the network and power, then set the radio channel and SIP account in the web interface.

Before you buy

• Using a UHF radio module may need a frequency licence or approval in your country; check before buying
• Range depends on the environment and antenna position
• It supports one radio connection