Fanvil X303-2 Wire IP Phone, 4 SIP Lines, 2.4 Inch Colour Screen, 2-Wire Power

Overview

The Fanvil X303-2 Wire is an office IP phone that runs on existing two-wire phone cabling for both network and power. It suits offices, hospitals and apartment buildings that want IP phones without new network cable.

Is it right for you?

Choose it for desks where only old phone cabling exists. It needs a Fanvil PN8 or PN24 2-wire PoE switch at the other end of the line. Where network cable is already in place, a standard X303 model is simpler.

Key features

• Network and power over one two-wire line (RJ11)
• 2.4 inch 320 x 240 colour screen
• 4 SIP lines, 3 line keys with LEDs
• HD voice on handset and speakerphone, G.722 and Opus
• 6-way conference calls
• Headset port (RJ9); wireless headsets via EHS (Jabra through the Fanvil EHS20, Plantronics through the APD-80 cable)
• 1,000-entry local phonebook, XML and LDAP remote phonebook
• Desk stand at 45° or 50°, wall mounting with a separate bracket

What else you need

• A Fanvil PN8 or PN24 2-wire PoE switch, or a 12 V DC 1 A power supply
• An IP PBX or SIP phone service
• A wall bracket if the phone goes on the wall

Installation

The phone plugs into the existing RJ11 wall socket; the 2-wire switch in the comms room supplies network and power. Setup is through auto-provisioning or the web page.

Before you buy

• The matching wall bracket model is not stated by the manufacturer
• Working temperature 0 to 45 °C