Grandstream GDS37XX L-Bracket, Stainless Steel Stud Mount for GDS Door Stations

Overview

The Grandstream GDS37XX L-Bracket is a stainless steel L-shaped support for setting a GDS series video door station flush into a stud-framed wall. It fixes to the timber or metal stud so the wall board does not carry the door station alone. It suits office fit-outs, modular buildings and other partition walls where the GDS3725, GDS3726 or GDS3726Q is being recessed.

Is it right for you?

• Use it for a flush install in a stud wall. Solid walls and drywall can use the GDS372X flush-mounting box on its own.
• It applies to the models that support flush mounting: the GDS3725, GDS3726 and GDS3726Q. The GDS3727 is wall mount only.
• It works together with the in-wall mounting kit, not instead of it.

Key features

• Stainless steel, 203.2 x 86 x 35 mm and 185.6 g.
• Comes with 2 plastic wall anchors with PA3.5 x 35 mm screws, 2 PM3 x 10 mm screws, 6 wing nuts, 6 nuts and a quick guide.
• Combines with the in-wall mounting kit for a recessed finish.

What else you need

• The GDS372X Flush-Mounting Box: the in-wall bracket, mounting template, front frame and frame screws are sold separately in that kit, so order both together.
• The door station, which is not included.

Installation

The installer fitting the door station should fit the bracket. Fix the bracket to the stud, then assemble the in-wall box and the door station as shown in the L-shaped bracket and in-wall guides. Stud spacing for the in-wall kit should not exceed 203.2 mm.

Before you buy

• The in-wall box, template and front frame are sold separately as the GDS372X Flush-Mounting Box.
• The door station is not included.
• Not needed for solid walls or drywall.