Grandstream GSC356X-FM Flush-Mount Kit for GSC3560 and GSC3565 Intercoms

Overview

The Grandstream GSC356X-FM is a flush-mount kit for the GSC3560 and GSC3565 outdoor intercoms. Its back box sits inside the wall, so the intercom’s front panel ends up close to the wall surface instead of protruding. It suits office buildings, residential complexes, schools, healthcare buildings and shops where a recessed intercom looks neater and offers less to grip or pry at.

Is it right for you?

• It fits the GSC3560 and GSC3565 only. GDS3720 series door stations use the GDS372X flush-mounting box instead.
• The wall needs enough depth to take the back box. The box dimensions are not stated by the manufacturer, so check the wall build-up or ask us before ordering.
• For a pole or column with no wall, the GSC356X-PM pole-mount kit is the alternative.

Key features

• Flush-mount back box with a cable grommet and cable tie for strain relief on the network and power cables.
• Five ST3.5 x 33 mm screws with anchors for the back box and five M4 x 14 mm screws for the intercom.
• M3 x 6 mm retaining screw for the cable management assembly.
• L-shaped hex key for the security screw, a wall cut-out template and a quick guide.

What else you need

• The GSC3560 or GSC3565 intercom, which is sold separately.

Installation

The installer fitting the intercom should fit the kit. Cut a 108.5 x 188.5 mm opening using the template and drill 6.5 mm holes for the anchors. Route the network and power cables through the grommet, fix the back box, secure the cable assembly with the M3 screw (a mandatory step), connect the intercom and fix it with the M4 screws and the security screw.

Before you buy

• The intercom is sold separately.
• Back box dimensions are not stated by the manufacturer: check your wall depth or ask us before ordering.
• Not for GDS3725 or GDS3726 door stations.