Grandstream GSC356X-PM Pole-Mount Kit for GSC3560 and GSC3565 Intercoms

Overview

The Grandstream GSC356X-PM is a pole-mount kit for the GSC3560 and GSC3565 outdoor intercoms. A bracket is strapped to the pole with two stainless steel bands, with no drilling of the pole, and the intercom’s mounting enclosure is screwed to the bracket. It suits help points and entry intercoms in car parks, on utility poles, access control posts, gate columns and other round supports where there is no wall.

Is it right for you?

• It fits the GSC3560 and GSC3565 only. It is not documented for GDS3720 series door stations or for the GSC3518HS horn speaker, which comes with its own stainless steel bracket.
• It works on vertical and horizontal poles.
• A supported pole diameter range is not stated by the manufacturer, so confirm your pole size with us before ordering.
• For a wall, the intercom’s own bracket or the GSC356X-FM flush-mount kit is the alternative.

Key features

• Pole-mount bracket for vertical or horizontal poles.
• Two adjustable stainless steel mounting bands, so the pole is not drilled.
• Grounding cable with a PM3 x 6 mm screw for earthing the assembly.
• Five PM4 x 12 mm screws to join the enclosure and bracket.

What else you need

• The GSC3560 or GSC3565 intercom, which is sold separately.
• A protected cable route up the pole for the network and power cables.

Installation

The installer fitting the intercom should fit the kit. Place the bracket against the pole, thread both bands through the bracket slots and tighten. Connect the grounding cable to the marked grounding point: grounding is mandatory. Fix the enclosure with the PM4 screws, connect network and power, insert the intercom and secure the front panel.

Before you buy

• The intercom is sold separately.
• Pole diameter range is not stated by the manufacturer: confirm your pole size with us before ordering.
• Cables still need a protected route up the pole to the unit.