Grandstream HT801V2 Analog Telephone Adapter, 1 FXS Port, VoIP for Analog Phones

Overview

The Grandstream HT801 V2 turns one ordinary analogue phone, cordless base or fax machine into an extension on an internet phone service or office phone system. It is a compact analogue telephone adapter (ATA) with one phone port (FXS) and one network port: plug the phone in, enter the SIP account, and the old handset makes and takes calls over the network.

Is it right for you?

• Suits a home office, a reception or lift phone, a fax line moving to VoIP, or a service provider rollout where each subscriber needs one line.
• One phone only. For two phones choose the HT802 V2; for Gigabit networking and a built-in router choose the HT812 V2.
• It needs a SIP account from a VoIP provider or an IP PBX; it does not connect to a landline.

Key features

• One FXS (Foreign Exchange Station) RJ11 port with one SIP profile, with call waiting, transfer, forward, hold, do not disturb and 3-way conferencing.
• HD voice with G.722 and Opus, plus G.711, G.723.1, G.729A/B, G.726-32 and iLBC.
• T.38 fax relay up to 14.4 kbps with automatic switch to G.711 pass-through.
• TLS and SRTP encryption, AES-encrypted provisioning, TR-069 and XML configuration files.
• Failover to a secondary SIP server if the main one is unreachable.
• Ring load of 5 REN, up to 1 km on 24 AWG wire; one 10/100 Mbps auto-sensing network port.
• 100 x 100 x 29.5 mm, 102 g.

What else you need

• A SIP account from a VoIP provider or an IP PBX. With a Grandstream UCM series IP PBX (the UCM6300A, for example) it can be provisioned with zero configuration.
• An analogue phone, cordless base or fax machine.
• A network cable to your router or switch.
• A mains socket: a 5 V DC 1 A universal power adapter is included.

Installation

Anyone can set it up. Plug the network port into the router or switch, connect the phone to the FXS port and power the unit with the supplied adapter. Configure through the web interface, GDMS (Grandstream Device Management System) or a provisioning server. Rated for 0 to 40 °C.

Software and licences

Standards-based SIP, so it registers with Grandstream UCM and CloudUCM systems and with third-party SIP servers and hosted VoIP services. Setup is through the web interface, GDMS (Grandstream Device Management System) or a provisioning server (HTTP, HTTPS, TFTP, SSH, TR-069, with AES-encrypted configuration).

Before you buy

• Needs a SIP account or IP PBX; there is no landline port.
• One phone only; the HT802 V2 takes two.
• The network port is 10/100 Mbps.