MORX BioFace MSD20K Face Recognition Terminal, 20,000 Faces, 5 Inch

Overview

The MORX BioFace MSD20K is a high-capacity face recognition terminal for attendance and door access in busy buildings. Alongside faces it reads fingerprints, ID cards, passwords and QR codes, in an aluminium alloy case with a 5 inch touchscreen. It is made for large offices, campuses, hospitals, banks and factories that want one terminal type across many entrances with tens of thousands of enrolled people.

Is it right for you?

• It suits a place with up to 20,000 people to recognise by face, or 40,000 fingerprints.
• It suits entrances where several doors must be coordinated: it supports interlock and anti-passback.
• It is rated 0 to 45 °C, so mount it indoors or under shelter.
• If you have fewer than 5,000 people, the BioFace MSD5K or MSD5K Mini may be enough.

Key features

• 20,000 faces, 20,000 cards and 20,000 passwords, 40,000 fingerprints and 500,000 logs.
• 2 MP colour wide dynamic range (WDR) camera and a 2 MP infrared live camera, so photos and video are rejected.
• Recognition in under 0.2 s at 0.5 to 2.5 m, adjustable, with mask detection.
• 5 inch IPS touchscreen, 720 x 1280, in an aluminium alloy case measuring 188 x 80 x 20 mm.
• Wired network (TCP/IP), Wi-Fi, an RS485 serial link and USB, so it fits most network layouts.
• Relay and alarm outputs, fire input, door sensor, exit button, doorbell, tamper alarm, anti-passback and interlock.
• Wiegand 26/34 in and out, so it can take an external reader or feed an access control panel.
• 1.2 GHz dual-core processor, 256 MB RAM and 4 GB storage.

What else you need

• A 12 V DC, 2 A power supply.
• For a controlled door: an electromagnetic (EM) lock or electric strike, an exit button and a door sensor.
• A network connection to your attendance or access software, or a USB disk for manual transfer.

Installation

An access control installer should fit it at face height indoors or under shelter, wire power, lock, exit button, door sensor and fire input, and connect it to the network. For interlocked doors or external readers, the Wiegand and RS485 connections need planning before cabling.

Before you buy

• ID card reading is standard; specify IC card reading if you need it.
• Rated 0 to 45 °C, so plan sheltered mounting at outdoor entrances.