At a glance
- Fingerprint Capacity
- 5,000
- Display
- 2.8 inch colour
- Verification Speed
- Under 1 s
- Communication
- TCP/IP, USB
- Transaction capacity
- 84,309
- Power Supply
- 12 V DC
Model BioTime5N-WMORX BioTime5N-W Fingerprint Attendance and Access Control Terminal, Wi-Fi
₹9,099 Incl. GST
₹7,711 + 18% GST
At a glance
- Fingerprint Capacity
- 5,000
- Display
- 2.8 inch colour
- Verification Speed
- Under 1 s
- Communication
- TCP/IP, USB
- Transaction capacity
- 84,309
- Power Supply
- 12 V DC
Wi-Fi version of the BioTime5N attendance and door access terminal, for factory gates, warehouses and branches where a network cable cannot reach. Fingerprint, card or PIN, 5,000 fingerprints and 5,000 cards, 2.8 inch colour screen and backup battery.
- WarrantyManufacturer warranty under MORX's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The MORX BioTime5N-W is the Wi-Fi version of the BioTime5N fingerprint attendance and door access terminal. It has a 2.8 inch colour screen, holds up to 5,000 fingerprints, 5,000 cards and 5,000 passwords, and reports attendance to your server without a network cable. It is for factory gates, warehouses and branch offices where Wi-Fi reaches the wall position but a cable cannot easily.
Is it right for you?
- It suits a clocking point with a reliable Wi-Fi signal and no network socket.
- It suits up to 5,000 people identified by fingerprint, card or PIN.
- It suits an indoor position: rated 0 to 50 °C and 20 to 60% humidity.
- If a network cable is available, the standard BioTime5N uses it.
Key features
- 5,000 fingerprints, 5,000 cards and 5,000 passwords.
- Optical fingerprint sensor with 1:N and 1:1 matching, verifying in under 1 s.
- False rejection rate below 0.01% and false acceptance rate below 0.0001%.
- Automatic push of records to the server over Wi-Fi; wired network (TCP/IP) and USB drive transfer are also on the platform.
- Built-in battery backup with buzzer and voice prompts.
- Lock relay, exit switch, door sensor, bell and Wiegand terminals for controlling one door.
What else you need
- A 12 V DC supply.
- A Wi-Fi network that reaches the mounting point and a PC running attendance software.
- For door control: an electromagnetic (EM) lock or electric strike, an exit button and a door sensor.
Installation
Survey the Wi-Fi signal strength at the mounting point before fixing the unit. An access control installer should mount it indoors, connect power and wire the lock, exit button and door sensor.
Software and licences
PayTime software is supported for attendance and payroll.
Before you buy
- Wi-Fi is an optional module on the BioTime5N platform, so confirm on the order that the -W unit is supplied with it fitted.
- Attendance record capacity is confirmed on the quotation.
- Rated 0 to 50 °C: install indoors.
Technical specifications
Key facts
- What is it?
- Fingerprint, Card & Keypad TerminalsBrand MORX
- How is it powered?
- 12 V DC
- What capacity does it support?
- 5,000 fingerprints5,000 cards5,000 PIN codes84,309 transaction records
- Which software works with it?
- PayTime
- Can SecurityGearHub help with installation?
- Setup guidanceManuals, wiring guides and answers to setup questions. On-site work is arranged separately where available. Ask about installation
- Which documents are available?
- On request. Ask us for the datasheet.
- Not stated by the manufacturer
- PoE, RS-485, OSDP, wiegand, outdoor rating, box contents
RelatedGuideFace vs fingerprint attendance machineDocumentsAll MORX documents
- Model / configuration
- BioTime5N-W
- Features and configuration
- Time Attendance and Access control - 2.8” Colour TFT Screen - 5,000 Fingerprint/Card/Pin - 100,000 Transactions - Identification Type: Finger/Card/Pin - Communication: TCP/IP, USB (Wi-Fi/GPRS optional) - Push Data Technology: Yes - Inbuilt Battery Backup
- Identification Type
- Finger/Card/Pin
- Communication
- TCP/IP, USB (Wi-Fi/GPRS optional)
- Push Data Technology
- Yes
- Transaction capacity
- 84,309
- Display
- 2.8 inch colour
- Fingerprint Sensor
- Optical
- Verification Mode
- 1:N and 1:1
- Verification Speed
- Under 1 s
- False Rejection Rate
- Below 0.01%
- False Acceptance Rate
- Below 0.0001%
- Power Supply
- 12 V DC
- Battery Backup
- Yes
- Operating Temperature
- 0 to 50 °C
- Operating Humidity
- 20 to 60% RH
- Compatible Software
- PayTime
- Fingerprint Capacity
- 5,000
- Card Capacity
- 5,000
- Password Capacity
- 5,000
- Capacity note
- Some published specifications list 100,000 attendance records; capacity is confirmed on the quotation
- Warranty
- Manufacturer warranty under MORX's terms. How claims work
Product attributes and shipping details
| Brand | MORX |
|---|---|
| Verification | Card, Fingerprint, PIN |
Questions about this product
Does it need a network cable?
No. It sends records over Wi-Fi. A wired network port and USB drive transfer are also available.
Does it need an internet connection?
No. It only needs your local Wi-Fi network to reach the attendance PC.
How many staff can it hold?
5,000 fingerprints, 5,000 cards and 5,000 passwords. Record capacity is confirmed on the quotation.
What power does it need?
12 V DC, with a built-in battery for short power cuts.
Can it control a door?
Yes. Lock relay, exit switch, door sensor, bell and Wiegand terminals are provided for one door.
Ask about this modelSetup, compatibility, what is in the box
Answers are automated. Do not enter personal or account details.
Looking for an alternative?
We list alternatives only when we have checked they suit the same job. Compare other models in the category, or ask us to suggest one for your site.