At a glance
- Fingerprint Capacity
- 9,590
- Card Capacity
- 20,000
- Communication
- TCP/IP, RS485, WG 26/34 out
- Ingress Protection
- IP54
- Dimensions
- 160 x 56.9 x 40.1 mm
- Transaction capacity
- 51,968
In the box
- Access control cable
Model BioWeb-RC1-MFMORX BioWeb-RC1-MF IP54 Web-Based Fingerprint and Mifare Access Reader
₹31,855 Incl. GST
₹26,996 + 18% GST
At a glance
- Fingerprint Capacity
- 9,590
- Card Capacity
- 20,000
- Communication
- TCP/IP, RS485, WG 26/34 out
- Ingress Protection
- IP54
- Dimensions
- 160 x 56.9 x 40.1 mm
- Transaction capacity
- 51,968
Mifare card version of the BioWeb-RC1 fingerprint door reader, for sites that already use 13.56 MHz Mifare smart cards. Set up from a web browser, IP54, stores 9,590 fingerprints and 20,000 cards, with network, RS485 and Wiegand 26/34.
- WarrantyManufacturer warranty under MORX's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The MORX BioWeb-RC1-MF is the Mifare card version of the BioWeb-RC1 fingerprint door reader, for places that already issue 13.56 MHz Mifare smart cards. It verifies a fingerprint or a Mifare card, is set up from a web browser over the network, and its IP54 housing suits indoor doors and sheltered outdoor entrances in offices, campuses and factories.
Is it right for you?
- It suits a place that already uses Mifare cards and wants fingerprint plus card at the door.
- It suits indoor or sheltered outdoor mounting: IP54 and rated 0 to 65 °C.
- There is no PIN keypad; identification is by fingerprint or card.
- If your cards are 125 kHz proximity cards, choose the standard BioWeb-RC1.
Key features
- 9,590 fingerprints and 20,000 cards, with 51,968 access logs and 1,536 system logs.
- 500 dpi optical sensor with 1:1 verification in under 600 ms.
- Wired network (TCP/IP), an RS485 serial link and Wiegand 26/34 bit input and output.
- Push data, so events reach the server as they happen.
- Anti-passback and remote door control from the browser.
- IP54 housing (dust-protected and splash-resistant), 160 x 56.9 x 40.1 mm.
What else you need
- A 9 to 24 V DC, 1 A power supply; a power adapter is not included, so budget a 12 V, 2 A supply.
- An electromagnetic (EM) lock or electric strike, an exit button and a door sensor.
- Mifare cards for your users and a network point for management.
Installation
An access control installer should fix it at the door with the supplied access control cable, wire the lock, exit button, door sensor and power, connect it to the network and set it up from a browser.
Software and licences
Management is through the built-in web server from any browser. No separate software or licence is stated.
Before you buy
- Confirm the card technology on the order: the -MF suffix is the Mifare reader version.
- A power adapter is not included.
- No PIN keypad.
Technical specifications
Key facts
- What is it?
- Fingerprint, Card & Keypad TerminalsBrand MORX
- How is it powered?
- 9 to 24 V DC, 1 A
- Does it support RS-485?
- Yes
- Does it support Wiegand?
- YesInput and output · 26, 34-bit
- Can it be used outdoors?
- IP54
- What capacity does it support?
- 9,590 fingerprints20,000 cards51,968 transaction records
- What comes in the box?
- Access control cable
- Can SecurityGearHub help with installation?
- Setup guidanceManuals, wiring guides and answers to setup questions. On-site work is arranged separately where available. Ask about installation
- Which documents are available?
- On request. Ask us for the datasheet.
- Not stated by the manufacturer
- PoE, OSDP, software
RelatedGuideFace vs fingerprint attendance machineDocumentsAll MORX documents
- Model / configuration
- BioWeb-RC1-MF
- Features and configuration
- Web based Access Control and Time Attendance - IP54 In/Outdoor weather proof Access Control - 9,590 Fingerprints and 20,000 Cards (Opt: MI Fare) - 51,968 Transactions - Identification Type: Finger/Card - Communication: TCP/IP, RS485, WG 26/34 out - Built-in http server - Push Data Technology: Yes Without Power Adaptor (12v 2amp)
- Identification Type
- Finger/Card
- Communication
- TCP/IP, RS485, WG 26/34 out
- Push Data Technology
- Yes Without Power Adaptor (12v 2amp)
- Transaction capacity
- 51,968
- Fingerprint Capacity
- 9,590
- Card Capacity
- 20,000
- Event Logs
- 51,968 access and event logs; 1,536 system logs
- Fingerprint Sensor
- Optical, 500 dpi
- Wiegand
- 26/34 bit input and output
- Ingress Protection
- IP54
- Anti-Passback
- Yes
- Web Management
- Yes
- Power Input
- 9 to 24 V DC, 1 A
- Operating Temperature
- 0 to 65 °C
- Dimensions
- 160 x 56.9 x 40.1 mm
- Warranty
- Manufacturer warranty under MORX's terms. How claims work
Product attributes and shipping details
| Brand | MORX |
|---|---|
| IP Rating | IP54 |
| Verification | Card, Fingerprint |
| Connectivity | Wiegand, Ethernet, RS-485 |
Questions about this product
Which cards does it read?
13.56 MHz Mifare cards. For 125 kHz proximity cards choose the BioWeb-RC1.
Do I need software?
No. It is managed from a browser through its built-in web server.
Does it need an internet connection?
No. It works on your local network.
Can it be mounted outdoors?
At a sheltered entrance. It is IP54 and rated 0 to 65 °C.
What power does it need?
9 to 24 V DC, 1 A. The adapter is not included.
Ask about this modelSetup, compatibility, what is in the box
Answers are automated. Do not enter personal or account details.
Looking for an alternative?
We list alternatives only when we have checked they suit the same job. Compare other models in the category, or ask us to suggest one for your site.