At a glance
- Arm Length
- 1 to 6 m
- Motor
- 24 V DC brushless with encoder
- MCBF
- 3,000,000 cycles or more
- Ingress Protection
- IP54
In the box
- MB200 boom barrier
- 2 x Remote control
- Stand
- Mounting accessories
- Anti sun light wired safety sensor
Model MB200MORX MB200 Boom Barrier, 24 V Brushless
₹59,030 Incl. GST
₹50,025 + 18% GST
At a glance
- Arm Length
- 1 to 6 m
- Motor
- 24 V DC brushless with encoder
- MCBF
- 3,000,000 cycles or more
- Ingress Protection
- IP54
Automatic boom barrier for gates and car park ramps, with a 304 stainless steel housing and 1 to 6 m aluminium arm. 24 V DC brushless motor, 1 to 6 s lifting time, IP54, 30 m remote range and rated for 3,000,000 cycles.
- WarrantyManufacturer warranty under MORX's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The MORX MB200 is an automatic boom barrier with a 304 stainless steel housing and an aluminium alloy arm from 1 to 6 m, for two-lane gates, basement ramps, industrial and logistics entries, hospitals, offices and checkpoint roads. A 24 V DC brushless motor with an encoder and a programmable controller move the arm smoothly, and it is rated for 3,000,000 cycles or more.
Is it right for you?
- Suits openings up to 6 m, including two-lane gates and wide ramps.
- Suits places where the housing is on show or exposed to weather: 304 stainless steel, IP54, rated for -35 to 60 °C and 5 to 95% humidity.
- Suits high-traffic entrances: mean cycles between failures (MCBF) of 3,000,000 or more.
- For a standard single lane with a painted cabinet, the MORX MB100 is the smaller model.
Key features
- 24 V DC brushless motor with encoder and an embedded programmable controller for controlled, smooth arm travel.
- Runs from 220 to 240 V AC mains and draws about 100 W.
- Automatic obstacle detection with configurable anti-smash, so the arm stops or reverses on contact.
- Reversible boom direction and adjustable rise and fall angle, so one unit suits left- or right-hand installation.
- Wireless remote control up to 30 m, plus local push buttons.
- Aluminium alloy arm from 1 to 6 m on a 350 x 300 x 975 mm stainless steel housing; chassis weight 45 kg.
What else you need
- A concrete base and a 220 to 240 V AC mains supply at the gate.
- A loop detector for vehicle safety, and a UHF reader with windscreen tags for hands-free entry.
- Only if you want it to work through a power cut, a 24 V backup battery, or a solar supply.
- Optional: traffic light arrow guidance, and external or built-in ground sensing.
Installation
A gate automation installer should fit it. The 45 kg chassis is bolted to a concrete base on its stand, the arm is fitted and its direction and angles set, mains and signal cables are run to the controller, and obstacle detection, auto-close and safety devices are set and tested.
Before you buy
- Choose the arm length (1 to 6 m) and any options such as backup battery, solar supply, traffic light arrows or ground sensing when ordering.
- The remote range of 30 m is a maximum and drops with walls, metal and interference.
Technical specifications
Key facts
- What is it?
- Boom barrierBrand MORX
- How is it powered?
- 220 to 240 V AC
- Can it be used outdoors?
- IP54
- What comes in the box?
- MB200 boom barrier; 2 x Remote control; Stand; Mounting accessories and 1 more
- Can SecurityGearHub help with installation?
- Setup guidanceManuals, wiring guides and answers to setup questions. On-site work is arranged separately where available. Ask about installation
- Which documents are available?
- On request. Ask us for the datasheet.
RelatedGuideBoom barrier buying guideDocumentsAll MORX documents
General
- Model / configuration
- MB200
- Features and configuration
- Boom Barrier - 24 V brushless motor with encoder - Automatic obstacle detection - 1.25 to 6 sec fast operation - IP54 durable design - With 2 Remote, Stand, Mounting accessories, Anti Sun Light Wired Safety Sensor.
- Motor
- 24 V DC brushless with encoder
- Arm Length
- 1 to 6 m
- Lifting Time
- 1 to 6 s
- Remote Control Distance
- 30 m
- MCBF
- 3,000,000 cycles or more
Input
- Supply Voltage
- 220 to 240 V AC
- Power Consumption
- 100 W
Environment
- Ingress Protection
- IP54
- Operating Temperature
- -35 to 60 °C
- Operating Humidity
- 5 to 95% RH
Physical
- Arm Material
- Aluminium alloy
- Housing
- 304 stainless steel
- Housing Dimensions
- 350 x 300 x 975 mm
- Chassis Weight
- 45 kg
- Warranty
- Manufacturer warranty under MORX's terms. How claims work
Product attributes and shipping details
| Brand | MORX |
|---|---|
| IP Rating | IP54 |
Questions about this product
What happens in a power cut?
A 24 V backup battery or a solar supply can be added so the barrier keeps working. Without one, it stops until mains returns.
What power does it need?
220 to 240 V AC mains, about 100 W. The motor itself is 24 V DC brushless.
Can it be used outdoors?
Yes. The housing is 304 stainless steel rated IP54, and it works from -35 to 60 °C and 5 to 95% humidity.
How wide a gate can it cover?
Arms from 1 to 6 m, so openings up to 6 m such as two-lane gates and ramps.
Does it stop if it hits a vehicle?
It has automatic obstacle detection with configurable anti-smash. Add a loop detector for vehicle safety.
Can it open automatically for registered cars?
Yes, with a UHF reader and windscreen tags, or any access controller that gives an open signal.
Ask about this modelGate sizing, power, accessories
Answers are automated. Do not enter personal or account details.
Looking for an alternative?
We list alternatives only when we have checked they suit the same job. Compare other models in the category, or ask us to suggest one for your site.