At a glance
- Fingerprint Capacity
- 1,000
- Display
- 2.4 inch TFT colour screen
- Communication
- Wi-Fi/USB
- Transaction capacity
- 100,000
- Power Supply
- 9 V DC adapter
- Compatible Software
- PayTime
Model mBio-G1-WMORX mBio-G1-W Fingerprint Attendance Machine with Wi-Fi and Access Control
₹6,245 Incl. GST
₹5,292 + 18% GST
At a glance
- Fingerprint Capacity
- 1,000
- Display
- 2.4 inch TFT colour screen
- Communication
- Wi-Fi/USB
- Transaction capacity
- 100,000
- Power Supply
- 9 V DC adapter
- Compatible Software
- PayTime
Wi-Fi attendance machine for offices, shops and site cabins where a network cable is hard to run, recording staff by fingerprint, card or PIN. 2.4 inch colour screen, built-in backup battery and a lock relay to control one door.
- WarrantyManufacturer warranty under MORX's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The MORX mBio-G1-W is the Wi-Fi version of the mBio-G1 attendance machine. Staff clock in by fingerprint, RFID (radio frequency identification) card or PIN on a 2.4 inch colour screen, and records go to your PC over Wi-Fi instead of a network cable. It suits offices, shops, schools and site cabins where running a cable to the wall is awkward but a Wi-Fi network is in reach, and it can also release one door lock.
Is it right for you?
- It suits a mounting point with a good Wi-Fi signal and no network socket nearby.
- It suits an indoor position: rated 0 to 60 °C and 20 to 60% humidity, with no ingress rating stated.
- If a network cable is easy to run, the standard mBio-G1 uses a wired connection instead.
- If you do not want any software or network, the BioTime16 (EXCEL) writes Excel reports to a USB drive on its own.
Key features
- Optical fingerprint sensor with 1:N and 1:1 matching, identifying a person in 0.5 s or less.
- False rejection rate below 0.01% and false acceptance rate below 0.0001%.
- Wi-Fi with push data, so each punch reaches the server as it happens; records can also be copied to a USB drive.
- Built-in battery backup for short power cuts.
- Voice prompts confirm each punch.
- Lock relay (NO, NC, COM), exit switch, door sensor, bell and Wiegand in and out connections for single-door access control.
What else you need
- A 9 V DC adapter.
- A Wi-Fi network that reaches the mounting point, and a PC running attendance software.
- For door control: an electromagnetic (EM) lock or electric strike, an exit button and, if wanted, a door sensor.
Installation
Check the Wi-Fi signal strength at the mounting position before fixing the unit. An access control installer should mount it indoors, connect the adapter and wire the lock, exit button and door sensor if the door is to be controlled.
Software and licences
Compatible with PayTime attendance software.
Before you buy
- Tell us your Wi-Fi network type when you order so the right configuration is supplied.
- Fingerprint, card and record capacity is confirmed on the quotation.
- Mount it indoors: no ingress rating is stated.
Technical specifications
Key facts
- What is it?
- Fingerprint, Card & Keypad TerminalsBrand MORX
- How is it powered?
- 9 V DC adapter
- Does it support Wiegand?
- YesInput and output
- What capacity does it support?
- 1,000 fingerprints1,000 cards100,000 transaction records
- Which software works with it?
- PayTime
- Can SecurityGearHub help with installation?
- Setup guidanceManuals, wiring guides and answers to setup questions. On-site work is arranged separately where available. Ask about installation
- Which documents are available?
- On request. Ask us for the datasheet.
- Not stated by the manufacturer
- PoE, RS-485, OSDP, outdoor rating, box contents
RelatedGuideFace vs fingerprint attendance machineDocumentsAll MORX documents
- Model / configuration
- mBio-G1-W
- Identification Type
- Finger/Card/Pin
- Communication
- Wi-Fi/USB
- Push Data Technology
- Yes
- Transaction capacity
- 100,000
- Display
- 2.4 inch TFT colour screen
- Fingerprint Sensor
- Optical
- Verification Mode
- 1:N and 1:1
- Identification Time
- 0.5 s or less
- False Rejection Rate
- Below 0.01%
- False Acceptance Rate
- Below 0.0001%
- Voice Prompt
- Yes
- Battery Backup
- Yes, built-in
- Power Supply
- 9 V DC adapter
- Operating Temperature
- 0 to 60 °C
- Operating Humidity
- 20 to 60% RH
- Access Control Wiring
- Lock relay (NO, NC, COM), exit switch, door sensor, bell, Wiegand in and Wiegand out
- Compatible Software
- PayTime
- Fingerprint Capacity
- 1,000
- Card Capacity
- 1,000
- Capacity note
- Capacity is confirmed on the quotation
- Warranty
- Manufacturer warranty under MORX's terms. How claims work
Product attributes and shipping details
| Brand | MORX |
|---|---|
| Verification | Card, Fingerprint, PIN |
| Connectivity | USB, Wi-Fi, Wiegand |
Questions about this product
Does it work without a network cable?
Yes. It sends records over Wi-Fi, and can also copy them to a USB drive.
Does it need an internet connection?
No. It needs only your local Wi-Fi network to reach the attendance PC.
How many staff can it hold?
Capacity is confirmed on the quotation. Tell us how many people you need to enrol.
What power does it need?
A 9 V DC adapter, with a built-in battery for short power cuts.
Can it control a door?
Yes. It has a lock relay, exit switch and door sensor connections for one door, plus Wiegand in and out.
Ask about this modelSetup, compatibility, what is in the box
Answers are automated. Do not enter personal or account details.
Looking for an alternative?
We list alternatives only when we have checked they suit the same job. Compare other models in the category, or ask us to suggest one for your site.