At a glance
- Fingerprint Capacity
- 1,000
- Display
- 2.4 inch TFT colour screen
- Communication
- TCP/IP USB
- Transaction capacity
- 100,000
- Power Supply
- 9 V DC adapter
- Compatible Software
- PayTime
Model mBio-G1MORX mBio-G1 Fingerprint Attendance Machine with Access Control, TCP/IP
₹6,433 Incl. GST
₹5,452 + 18% GST
At a glance
- Fingerprint Capacity
- 1,000
- Display
- 2.4 inch TFT colour screen
- Communication
- TCP/IP USB
- Transaction capacity
- 100,000
- Power Supply
- 9 V DC adapter
- Compatible Software
- PayTime
Attendance machine for offices and shops that records when staff arrive and leave by fingerprint, card or PIN, and can also open one door. 2.4 inch colour screen, network and USB connection, built-in backup battery and voice prompts; works with PayTime software.
- WarrantyManufacturer warranty under MORX's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The MORX mBio-G1 is a compact attendance machine that records when staff arrive and leave, identified by fingerprint, RFID (radio frequency identification) card or PIN on a 2.4 inch colour screen. It can also release one door lock, so a small office, school, shop, clinic or factory gets accurate in and out records without proxy punching, plus control of a single entry door, from one device.
Is it right for you?
- It suits a small to mid-size team that clocks in at one point and wants records sent to a PC over the network.
- It suits an indoor position: it is rated 0 to 60 °C and 20 to 60% humidity, and no ingress rating is stated.
- It needs a network cable to the mounting point. If only Wi-Fi is available, choose the mBio-G1-W.
- If you want attendance reports without any software or network, the BioTime16 (EXCEL) writes Excel reports to a USB drive by itself.
Key features
- Optical fingerprint sensor with 1:N and 1:1 matching, identifying a person in 0.5 s or less.
- False rejection rate below 0.01% and false acceptance rate below 0.0001%, so genuine staff are rarely refused and strangers are not accepted.
- Wired network (TCP/IP) with push data, so each punch reaches the server as it happens; records can also be downloaded to a USB drive.
- Built-in battery backup, so it keeps running through short power cuts.
- Voice prompts confirm each punch.
- Lock relay (NO, NC, COM), exit switch, door sensor and bell connections, plus Wiegand in and out, so it can control a door or take an external card reader.
What else you need
- A 9 V DC adapter.
- A network cable to the mounting point and a PC running attendance software.
- For door control: an electromagnetic (EM) lock or electric strike wired to the lock relay, an exit switch and a door sensor.
Installation
An access control installer should mount it indoors, run the network cable and 9 V DC adapter, and wire the lock relay, exit switch and door sensor if the door is to be controlled. An external card reader can be added on the Wiegand input.
Software and licences
The terminal is compatible with PayTime attendance software.
Before you buy
- Fingerprint, card and record capacity is confirmed on the quotation, so tell us the number of staff you need to enrol.
- Mount it indoors: no ingress rating is stated.
Technical specifications
Key facts
- What is it?
- Fingerprint, Card & Keypad TerminalsBrand MORX
- How is it powered?
- 9 V DC adapter
- Does it support Wiegand?
- YesInput and output
- What capacity does it support?
- 1,000 fingerprints1,000 cards100,000 transaction records
- Which software works with it?
- PayTime
- Can SecurityGearHub help with installation?
- Setup guidanceManuals, wiring guides and answers to setup questions. On-site work is arranged separately where available. Ask about installation
- Which documents are available?
- On request. Ask us for the datasheet.
- Not stated by the manufacturer
- PoE, RS-485, OSDP, outdoor rating, box contents
RelatedGuideFace vs fingerprint attendance machineDocumentsAll MORX documents
- Model / configuration
- mBio-G1
- Identification Type
- Finger/Card/Pin
- Communication
- TCP/IP USB
- Push Data Technology
- Yes
- Transaction capacity
- 100,000
- Display
- 2.4 inch TFT colour screen
- Fingerprint Sensor
- Optical
- Verification Mode
- 1:N and 1:1
- Identification Time
- 0.5 s or less
- False Rejection Rate
- Below 0.01%
- False Acceptance Rate
- Below 0.0001%
- Voice Prompt
- Yes
- Battery Backup
- Yes, built-in
- Power Supply
- 9 V DC adapter
- Operating Temperature
- 0 to 60 °C
- Operating Humidity
- 20 to 60% RH
- Access Control Wiring
- Lock relay (NO, NC, COM), exit switch, door sensor, bell, Wiegand in and Wiegand out
- Compatible Software
- PayTime
- Fingerprint Capacity
- 1,000
- Card Capacity
- 1,000
- Capacity note
- Some published specifications list higher fingerprint, card and log capacities; capacity is confirmed on the quotation
- Warranty
- Manufacturer warranty under MORX's terms. How claims work
Product attributes and shipping details
| Brand | MORX |
|---|---|
| Verification | Card, Fingerprint, PIN |
| Connectivity | USB, Wiegand, Ethernet |
Questions about this product
How many staff can it hold?
Capacity is confirmed on the quotation. Tell us how many people you need to enrol and we will confirm the right unit.
Does it need an internet connection?
No. It works on your local network, pushing records to a PC, and can also download records to a USB drive.
What power does it need?
A 9 V DC adapter. A built-in battery keeps it running through short power cuts.
Can it open a door?
Yes. It has a lock relay with NO, NC and COM contacts plus exit switch and door sensor connections for one door.
Which software does it work with?
PayTime attendance software.
Can it be used outdoors?
No ingress rating is stated, so mount it indoors.
Ask about this modelSetup, compatibility, what is in the box
Answers are automated. Do not enter personal or account details.
Looking for an alternative?
We list alternatives only when we have checked they suit the same job. Compare other models in the category, or ask us to suggest one for your site.