Norden Back Box for UK Face Plate, Surface Mount, E Series, White

Overview

The Norden back box for UK face plate, surface mount, E Series (order code 12B-E1WH) is a white box that fixes to the wall surface and gives the keystone jacks and cable slack a closed space behind the face plate. It is the way to add a network outlet where the wall cannot be chased, such as a finished office, a shop, a glass partition or a retrofit camera or access point drop where the cable runs in trunking or along the wall.

Is it right for you?

• Choose it when the cable runs on the surface and there is no recessed box in the wall.
• If a flush box is already fitted, you do not need it; fix the face plate to the flush box instead.
• It is made for the Norden E Series UK face plates 124-E6401WH (1 port) and 124-E6402WH (2 port); order one back box per face plate.

Key features

• Surface mount, so no cutting into plaster, glass or partition walls.
• Takes the Norden E Series UK face plate, 1 port or 2 port.
• White, to match the face plate and standard white fittings.

What else you need

• A Norden E Series UK face plate, 124-E6401WH or 124-E6402WH, and one keystone jack per port.
• Trunking or clips for the surface cable run.

Installation

A network installer screws the box to the wall where the trunking ends, brings the cable in through the knockout, terminates it on the keystone jack and screws the face plate to the box.

Before you buy

• Order one back box per face plate.
• Depth and knockout positions are not stated by the manufacturer for this part number. Confirm them with your quote, especially if 180 degree keystone jacks will sit behind the plate.
• For concealed wiring, use a flush wall box instead.