At a glance
- Category
- CAT6 (Category 6)
- Shielding
- Unshielded (UTP)
- Ports
- 24, loaded
- Port Type
- RJ45
Model 121-E1B18024LCurrent modelNorden CAT6 UTP PCB Punch Down Patch Panel, 24 Port Loaded, E Series
₹3,863 Incl. GST
₹3,274 + 18% GST
At a glance
- Category
- CAT6 (Category 6)
- Shielding
- Unshielded (UTP)
- Ports
- 24, loaded
- Port Type
- RJ45
Rack panel where cable runs from outlets, cameras and access points end, so short patch cords can link each port to a switch or network video recorder (NVR). Category 6 UTP, 24 RJ45 ports fitted, punch down rear, 1U for 19 inch racks, black.
- WarrantyManufacturer warranty under Norden's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The Norden CAT6 UTP PCB punch down patch panel, 24 port loaded, is the rack panel where the cable runs from outlets, cameras and access points end inside the rack or wall cabinet. Short patch cords then link each port to the switch or network video recorder (NVR), so moves and changes never disturb the installed cable. It is Category 6 unshielded twisted pair (UTP) with 24 RJ45 ports already fitted on a printed circuit board, 1U high for 19 inch racks, in black.
Is it right for you?
- 24 ports suit a floor or a small building; plan one port per cable run plus spares for growth. Norden also makes a 12 port version, 121-E1B18012L.
- It needs 1U of free space on 19 inch rails, in a floor rack or a wall cabinet.
- It accepts 22 to 26 AWG solid conductors, which matches Norden’s 23 AWG and 24 AWG installation cables.
- Listed for LAN, multimedia and Power over Ethernet (PoE) use, so camera and access point runs can end here too.
Key features
- 24 RJ45 ports loaded on a printed circuit board, so there are no loose jacks to fit.
- Rear punch down on dual IDC (insulation displacement) contacts with horizontal termination, labelled for both T568A and T568B colour codes.
- Accepts 22 to 26 AWG solid conductors.
- 1U high, fits 19 inch racks and wall cabinets.
- Black finish.
What else you need
- A Krone or 110 punch down tool for termination; it is not included.
- Patch cords from each port to the switch or NVR, and a cable manager above or below the panel to keep them tidy.
- A 19 inch rack or wall cabinet with at least 1U free.
Installation
A network or CCTV installer should terminate it. Fix the panel to the 19 inch rails, dress the incoming cables to the rear, punch each pair down on the IDC contacts following the T568A or T568B label to match the outlets, then test each link. Plan a cable manager above or below the panel.
Before you buy
- Termination needs a Krone or 110 punch down tool, which is not included.
- Plan a cable manager above or below the panel to keep patch cords tidy.
- For a smaller cabinet, the 12 port version is 121-E1B18012L.
Technical specifications
Key facts
- What is it?
- Structured cabling accessoryBrand Norden, model 121-E1B18024L
- What is it used for?
- LAN, multimedia, PoE
- Which documents are available?
- On request. Ask us for the datasheet.
- Category
- CAT6 (Category 6)
- Shielding
- Unshielded (UTP)
- Ports
- 24, loaded
- Port Type
- RJ45
- Termination
- PCB punch down, dual IDC contacts, horizontal termination
- Termination Tool
- Krone or 110 punch down tool
- Wiring
- T568A and T568B colour coded labels
- Wire Gauge
- 22 to 26 AWG solid
- Height
- 1U
- Mounting
- 19 inch rack
- Colour
- Black
- Application
- LAN, multimedia, PoE
- Series
- E Series
- Warranty
- Manufacturer warranty under Norden's terms. How claims work
Product attributes and shipping details
| Brand | Norden |
|---|
Questions about this product
What tool do I need to terminate this patch panel?
A Krone or 110 punch down tool. The rear labels show both T568A and T568B colour codes.
Will it fit my wall mount cabinet?
It is a 1U panel for standard 19 inch rails, so it fits 19 inch racks and wall cabinets with at least 1U free.
Can I use 23 AWG Category 6 cable with it?
Yes. It accepts 22 to 26 AWG solid conductors, which covers 23 AWG and 24 AWG Category 6 cable.
Can PoE camera runs end on this panel?
Yes. It is listed for LAN, multimedia and PoE use.
Is there a smaller version?
Yes. Norden makes a 12 port version, 121-E1B18012L.
Ask about this modelSetup, compatibility, what is in the box
Answers are automated. Do not enter personal or account details.
Looking for an alternative?
We list alternatives only when we have checked they suit the same job. Compare other models in the category, or ask us to suggest one for your site.