MORX Wireless Remote Kit, 2 Remotes with Single-Circuit Receiver

Overview

The MORX Wireless Remote Kit pairs two handheld remotes with one single-circuit receiver, so either remote opens the same door lock or triggers the same controller input without a wired exit button. It suits small offices, clinics and shops where, for example, a receptionist and a manager both need to let visitors in, or where one remote is kept as a spare.

Is it right for you?

• Suits two people who need to release one door.
• Suits one door or one function: the receiver has a single output channel.
• If one remote is enough and you want published radio figures, the MORX MPR-1 (315 MHz, 30 m, NO/NC/COM output) is the documented single-remote version. Compatibility between the two products is not confirmed.

Key features

• Two remotes in the set.
• Single-circuit receiver: one output channel, so one door or one function.

What else you need

• A DC supply for the receiver; the voltage is not stated by the manufacturer, so check the receiver label.
• A lock to release or an access controller with an exit input. Confirm the receiver output type and rating against the lock or controller before wiring.

Installation

An access control installer or electrician should fit it. Mount the receiver near the door, away from large metal surfaces, wire it to its supply and to the lock or controller input, and test the range from where the remotes will be used before fixing the receiver.

Before you buy

• Radio frequency, range, receiver supply voltage and output contact type are not stated by the manufacturer; check the receiver label and test range at your place before fixing.
• One output channel only, so it cannot control two doors separately.