Suprema XPass 2 Outdoor RFID Reader with Door Control, IP67 and IK08, PoE

Overview

The Suprema XPass 2 opens a door when someone taps an RFID card or their phone. It has its own relay and network port, so it can run a door by itself, and its sealed housing suits outdoor gates and doors at offices, factories and buildings.

Is it right for you?

Choose it for card access at doors that face the weather or rough use. It has no fingerprint or face recognition. If a controller such as Suprema CoreStation runs your doors, the XPass D2 reader may be enough.

Choosing your version

All four versions share the same reader electronics, capacities, sealing and PoE. They differ in shape, in whether a keypad is fitted, and in which cards they read.

• XP2-MDPB: mullion shape, 48 mm wide, fits a door frame; EM and MIFARE-family cards
• XP2-GDPB: gang box shape, fits a standard wall box; EM and MIFARE-family cards
• XP2-GKDPB: gang box shape with a 3 x 4 keypad for card plus PIN; EM and MIFARE-family cards
• XP2-MAPB: mullion shape; adds HID Prox and HID iCLASS cards

Pick the mullion shape for narrow door frames and the gang box shape where a wall box is already in place. Add the keypad where sensitive doors need a PIN as well as a card. Only XP2-MAPB reads HID cards.

Key features

• Every version reads EM (125 kHz) and MIFARE, MIFARE Plus, DESFire and FeliCa (13.56 MHz) cards
• Phones over NFC and BLE (Android and iOS)
• Separate capacities: 200,000 card users and 1,000,000 text logs
• IP65 and IP67, IK08 housing, -35 to 65 °C
• Ethernet, RS-485 (OSDP v2), Wiegand in or out, 2 inputs, 1 relay and PoE (IEEE 802.3af)
• Can also act as a reader for a controller over RS-485 or Wiegand

What else you need

• A door lock, exit button and door sensor (sold separately)
• A PoE switch or injector, or a 12 V DC or 24 V DC power supply
• RFID cards that match the card types of your version, if people will use cards
• Suprema BioStar X or BioStar Air to enrol cards and set door rules

Installation

The mullion versions mount on a door frame and the gang box versions on a wall box, each with the supplied bracket. Extended brackets are listed as optional accessories. Fitting by an installer is recommended.

Software and licences

Doors, users and reports are set up in Suprema BioStar X, the on-premises access control software (sold separately). BioStar X licences are sized by the number of doors and users, and time and attendance reports need the separate attendance add-on.

It also works with Suprema BioStar Air, the cloud-hosted option, so it can be run without a local server.

Phone access uses Suprema Mobile Access: users carry a mobile access card in the Airfob Pass app. It is set up separately from the device.

Before you buy

• No fingerprint or face recognition
• Check that your cards match the listed types; HID card reading is on XP2-MAPB only
• Only XP2-GKDPB has a keypad for PIN entry