At a glance
- Length
- 3 m
- Conductor
- Copper
- Outer diameter
- Approximately 6 mm
- Jacket
- Flexible black outer jacket
In the box
- UGREEN 20711 3 m XLR male-to-female cable
Model 20711UGREEN 20711 3 m XLR Male-to-Female Microphone Cable
₹1,289 Incl. GST MRP ₹2,665 51% below MRP
₹1,092 + 18% GST
At a glance
- Length
- 3 m
- Conductor
- Copper
- Outer diameter
- Approximately 6 mm
- Jacket
- Flexible black outer jacket
Connects or extends a microphone to a mixer, audio interface or PA system for balanced analogue audio. 3 m XLR male-to-female cable with copper conductors and a copper shield, about 6 mm thick.
- WarrantyManufacturer warranty under UGREEN's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The UGREEN 20711 is a 3 m microphone cable with a 3-pin XLR plug at each end, one female and one male, for connecting or extending a microphone to a mixer, audio interface or PA system, or linking balanced line-level equipment. It is a passive, straight-through cable with copper conductors and a copper shield, about 6 mm thick, that carries the balanced signal between compatible XLR equipment without changing it.
Is it right for you?
- Suits dynamic and condenser microphones and any XLR audio equipment with full-size 3-pin connectors.
- It is passive: no preamp, gain stage, digital conversion or codec. It is not an XLR-to-USB interface.
- Not an unbalanced guitar cable and not a speaker-power cable.
Key features
- Three-pin XLR male and three-pin XLR female connectors, electrically straight through.
- Passive balanced analogue connection when used between balanced endpoints.
- Copper conductors, PE insulation, a cotton layer and a copper shield to preserve the connected equipment’s signal.
- Flexible black jacket, about 6 mm outer diameter.
- Passes phantom power from compatible equipment; it does not generate it.
- 3 m long.
What else you need
- A microphone or output device with an XLR male connector and a mixer, preamp, interface or powered speaker with an XLR female input.
- For a condenser microphone, equipment that supplies phantom power.
Installation
- In typical microphone use, connect the female end to the microphone or output device and the male end to the mixer, preamp, interface or powered-speaker input.
- Switch phantom power off and lower the gain before connecting or disconnecting a condenser microphone, then restore power once the connections are secure.
- Route the cable so it does not create a trip or snag hazard.
Before you buy
- Not an XLR-to-USB interface, not a microphone preamp, not an unbalanced guitar cable and not a speaker-power cable.
- The cable cannot remove noise caused by faulty equipment grounding or gain staging elsewhere in the system.
- Do not force a connector or continue using damaged pins, plugs or insulation, and keep the connectors dry.
- Microphone, mixer, audio interface and a storage tie are not listed as included.
Technical specifications
Key facts
- What is it?
- Audio Cables & AdaptersBrand UGREEN, model 20711
- What comes in the box?
- UGREEN 20711 3 m XLR male-to-female cable
- Which documents are available?
- Datasheet, online specifications Open documents
- Product
- XLR male-to-female microphone/extension cable
- Length
- 3 m
- Connectors
- Three-pin XLR male and three-pin XLR female
- Signal
- Passive balanced analogue when used with balanced endpoints
- Conductor
- Copper
- Shielding
- Copper shield with cotton layer and PE insulation
- Outer diameter
- Approximately 6 mm
- Jacket
- Flexible black outer jacket
- Phantom power
- Pass-through only with compatible equipment
- Material
- Copper
- Weight
- 196 g
- Country of origin
- China
- Manufacturer
- UGREEN Group Limited
- Warranty
- Manufacturer warranty under UGREEN's terms. How claims work
Product attributes and shipping details
| Brand | UGREEN |
|---|---|
| Cable Length | 3 m |
Downloads
Documentation
- UGREEN 20711 family datasheetDatasheet · Family · 46.8 KBDownload
- UGREEN 20711 product pageOnline specifications · This model · eu.ugreen.comView official page
Series documents can differ from your exact model. Report a wrong or missing file
Questions about this product
Does it carry phantom power?
It passes phantom power supplied by the mixer or interface when the equipment is correctly wired. The cable does not generate it.
Which end goes on the microphone?
The female end goes on the microphone or output device and the male end into the mixer, preamp, interface or speaker input.
Can I plug it into a USB port or a guitar?
No. It is a passive balanced XLR cable, not a USB interface or an unbalanced instrument cable.
Can it be used for line-level connections?
Yes, between equipment with balanced XLR line outputs and inputs.
Ask about this modelSetup, compatibility, what is in the box
Answers are automated. Do not enter personal or account details.
Looking for an alternative?
We list alternatives only when we have checked they suit the same job. Compare other models in the category, or ask us to suggest one for your site.