At a glance
- Dimensions
- 8.5 × 14.5 × 1
- Front interface
- 1 × RJ45 female, 8P8C
- Rear interface
- Colour-coded IDC termination
- Orientation
- 180° cable entry
In the box
- UGREEN 80452 Cat6 UTP tool-free keystone jack
Model 80452UGREEN 80452 Tool-Free Cat6 UTP RJ45 Keystone Jack, 180°
₹299 Incl. GST MRP ₹554 46% below MRP
₹253 + 18% GST
At a glance
- Dimensions
- 8.5 × 14.5 × 1
- Front interface
- 1 × RJ45 female, 8P8C
- Rear interface
- Colour-coded IDC termination
- Orientation
- 180° cable entry
Network socket insert for wall plates and patch panels that fits without a punch-down tool. Cat6 UTP RJ45 keystone jack with 180° cable entry and colour-coded termination for T568A or T568B, for 23 to 24 AWG cable.
Out of stock
- WarrantyManufacturer warranty under UGREEN's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The UGREEN 80452 is a Cat6 UTP RJ45 keystone jack that terminates one network cable into a female socket for a wall plate or patch panel, without a punch-down tool. The cable enters straight from the rear (180 degree entry) into a colour-coded block for T568A or T568B wiring, and the finished link supports up to 1000 Mbps and PoE (Power over Ethernet). It suits home and office wall outlets and small patch panels.
Is it right for you?
- Suits unshielded Cat6 cable with 23 to 24 AWG conductors, wired to T568A or T568B.
- Suits anyone terminating a few outlets without buying a punch-down tool.
- It is unshielded, so it does not suit a shielded Cat6A or Cat7 system.
- The module body must fit the keystone opening of your chosen plate or panel.
Key features
- Tool-free rear IDC (insulation displacement contact) termination, colour-coded for T568A and T568B.
- One RJ45 female 8P8C front, with a head size of 14.5 x 16 mm.
- 180 degree straight cable entry.
- Up to 1000 Mbps with a compliant complete link.
- PoE pass-through to IEEE 802.3af and 802.3at.
- 50U gold-plated pins and a PC housing; about 15 g.
What else you need
- A keystone wall plate, surface box or patch panel with a compatible opening.
- Unshielded Cat6 solid installation cable with 23 to 24 AWG conductors, and a patch lead to the device.
- A cable tester to check the conductor map and link.
Installation
Lay the eight conductors into the colour-coded block following T568A or T568B, terminate them without a punch-down tool as the module is designed for, and clip the jack into the plate or panel. Keep fingers clear of trimmed conductors and IDC contacts and wear eye protection. Test the link before use; professional installations may require certification testing.
Before you buy
- It is not a shielded Cat6A or Cat7 jack, not a female-to-female coupler and not a network switch.
- A Cat6 label does not upgrade lower-category cable or the rest of the link, and the jack cannot repair split pairs, poor conductors, corrosion or bad device ports.
- Indoor use only: no outdoor rating is established. Keep it dry, clean and away from corrosive environments or excessive heat.
- Never work on live mains. Network wiring is low voltage, but wall boxes and racks may be close to hazardous circuits.
Technical specifications
Key facts
- What is it?
- Network accessoryBrand UGREEN, model 80452
- Does it support PoE?
- YesPoE+ (IEEE 802.3at), PoE (IEEE 802.3af)
- What comes in the box?
- UGREEN 80452 Cat6 UTP tool-free keystone jack
- Which documents are available?
- Online specifications Open documents
- Brand / SKU
- UGREEN 80452
- Product role
- a tool-free Cat6 UTP keystone jack with an RJ45 female front and a rear IDC termination block
- Product type
- Tool-free Cat6 UTP keystone jack
- Front interface
- 1 × RJ45 female, 8P8C
- Rear interface
- Colour-coded IDC termination
- Orientation
- 180° cable entry
- Wiring schemes
- T568A and T568B
- Conductor size
- 23 to 24AWG
- Network rate
- Up to 1000 Mbps with a compliant complete link
- PoE
- IEEE 802.3af / 802.3at
- Contacts
- 50U gold-plated pins
- Housing
- PC
- Front head size
- 14.5 × 16 mm
- Dimensions
- 8.5 × 14.5 × 1
- Weight
- 15 g
- Country of origin
- China
- Manufacturer
- UGREEN Group Limited
- Warranty
- Manufacturer warranty under UGREEN's terms. How claims work
Product attributes and shipping details
| Brand | UGREEN |
|---|
Downloads
Documentation
- UGREEN 80452 product pageOnline specifications · This model · ugreenindia.comView official page
Series documents can differ from your exact model. Report a wrong or missing file
Questions about this product
Do I need a punch-down tool?
No. The conductors lay into the colour-coded IDC block and the module terminates them without a separate tool.
Which cable does it take?
Unshielded Cat6 solid cable with 23 to 24 AWG conductors, wired to T568A or T568B.
Does it pass PoE?
Yes, IEEE 802.3af and 802.3at PoE on a compliant complete link.
Does it fit any wall plate?
It is a standard keystone module with a 14.5 x 16 mm front head; check that your plate or panel has a compatible keystone opening.
Ask about this modelSetup, compatibility, what is in the box
Answers are automated. Do not enter personal or account details.
Looking for an alternative?
We list alternatives only when we have checked they suit the same job. Compare other models in the category, or ask us to suggest one for your site.