UGREEN Cat 7 F/FTP Ethernet Cable, 10 m, Black (11273)

Overview

The UGREEN 11273 is a 10 m black Cat 7 Ethernet cable with RJ45 plugs at both ends and F/FTP shielding. It gives a stable wired link when the router or switch is too far for a short patch lead: across a room to a workstation, network-attached storage (NAS) unit, smart TV, console or network video recorder (NVR), and it is rated for up to 10 Gbps and 600 MHz.

Is it right for you?

• Suits a 10 m route across a large room or into the next one, in one piece.
• Shielding helps in offices and equipment rooms with electrical noise from power cables and machines.
• The connected ports set the speed: 10 Gbps needs 10 Gbps ports at both ends, and on 1 Gbps or 2.5 Gbps ports it runs at that speed.

Key features

• Cat 7, rated up to 10 Gbps and 600 MHz.
• F/FTP: four individually shielded copper twisted pairs plus an overall foil shield, to reduce crosstalk and interference.
• Copper conductors.
• 10 m ready-to-connect length, plugs already fitted.
• Standard RJ45 plugs for routers, switches and network cards; backward compatible with Cat 6 and Cat 5e equipment.

What else you need

• Two devices with standard RJ45 Ethernet ports: a router, switch, PC, console, smart TV, NAS or similar.
• A laptop or tablet without an Ethernet port needs a USB or USB-C Ethernet adapter or dock; the cable does not add a port.
• 10 Gbps ports at both ends if you want 10 Gbps.

Installation

No tools, drivers or power supply are needed: push each plug into an RJ45 port until the latch clicks. Measure the route first, leave slack at both ends, avoid tight bends and keep the plugs where moving equipment cannot pull on them. Route it along furniture or a cable channel so the connectors stay accessible and are not pulled. Measure the path before ordering.

Before you buy

• The connected ports set the actual link speed; the cable does not make a slower port faster.
• Measure the route, including corners, before ordering.