At a glance
- Dimensions
- 16 × 42.7 × 8.7 cm
- Supported screen range
- Approximately 4 to 12.9in
- Total arm length
- Approximately 750 mm
- Head rotation
- 360°
In the box
- UGREEN 50394 articulated holder assembly with base clamp and adjustable device cradle
Model 50394UGREEN Long-Arm Clamp Tablet and Phone Holder (50394)
₹3,389 Incl. GST MRP ₹4,431 23% below MRP
₹2,872 + 18% GST
At a glance
- Dimensions
- 16 × 42.7 × 8.7 cm
- Supported screen range
- Approximately 4 to 12.9in
- Total arm length
- Approximately 750 mm
- Head rotation
- 360°
Long clamp-on arm that holds a tablet or phone in view from a desk, table or headboard edge, for hands-free watching and reading. About 750 mm of spring-steel reach, for devices of about 4 to 12.9 inches.
- WarrantyManufacturer warranty under UGREEN's terms. Warranty claims
- DeliveryPrice, availability and delivery charges are confirmed in your quotation. Shipping and delivery
Overview
The UGREEN 50394 is a long articulated arm that clamps to the edge of a desk, table or strong headboard and holds a tablet or phone in view, for hands-free watching, reading and video calls. Two spring-steel arm sections give about 750 mm of reach, and the cradle sits on a 360° joint. It suits devices from about 4 to 12.9 inches.
Is it right for you?
- Suits phones and tablets from about 4 to 12.9 inches, with a cradle that opens from about 112 to 225 mm.
- Suits a strong, flat edge up to about 52 mm thick. The pads reduce contact but do not make every surface suitable.
- Not a floor stand or wall fixing, and not a vibration-free camera rig: the long arm can move after you touch the screen.
- Never position the device directly above a person, for example over a bed.
Key features
- Two-stage spring arm with about 750 mm total reach.
- Arm joints move through about 180° and 135°, plus a 360° joint at the device head.
- Tool-free screw clamp for edges up to about 52 mm thick.
- Steel spring arms, adjustable composite cradle, threaded metal clamp hardware and soft contact pads, in black.
- About 834 g. Passive holder with no electronics.
What else you need
A strong, flat edge to clamp to and a device within the size range. Use your own charging cable if you want to charge while the device is held.
Installation
Open the screw clamp, seat it on a strong flat edge up to 52 mm thick and tighten by hand. Set the cradle to the device width, then shape the arm. No tools are needed.
Before you buy
- Long-arm movement can occur after touch.
- The device must never be placed directly above a person.
- It has no MagSafe, wireless charging, battery, powered USB port or motor.
- Silicone and soft pads reduce, but do not eliminate, the chance of marks on the device or the surface.
- Not every phone case or device is compatible, and no stand is free of wobble during touch, typing or drawing.
- It is not safety equipment. Do not hang a device where a release could injure someone or cause serious damage.
Technical specifications
Key facts
- What is it?
- Stands & MountsBrand UGREEN, model 50394
- What comes in the box?
- UGREEN 50394 articulated holder assembly with base clamp and adjustable device cradle
- Which documents are available?
- Online specifications Open documents
- Brand / SKU
- UGREEN 50394
- Model / type
- Long-Arm Clamp Holder
- Colour
- Black
- Primary use
- clamps to a suitable desk, table or strong headboard and positions a compatible phone or tablet on an articulated spring arm
- Device fit
- Devices from approximately 4 to 12.9 inches; an adjustable holding span of approximately 112 to 225 mm
- Adjustment
- two-stage spring arm with about 750 mm total reach, official regional UGREEN 180° and 135° arm-joint movement, plus a 360° device-head joint
- Mounting method
- tool-free screw clamp for a strong, flat edge up to approximately 52 mm / 2in thick; protective pads reduce direct contact but do not make every surface suitable
- Materials
- sturdy steel spring arms, adjustable composite cradle, threaded metal clamp hardware and soft contact pads
- Supported screen range
- Approximately 4 to 12.9in
- Cradle opening shown
- Approximately 112 to 225 mm / 4.4 to 8.8in
- Total arm length
- Approximately 750 mm
- Maximum mounting thickness
- Approximately 52 mm / 2in
- Head rotation
- 360°
- Arm joints
- Approximately 180° and 135°
- Charging / electronics
- None; passive mechanical holder
- Dimensions
- 16 × 42.7 × 8.7 cm
- Weight
- 834 g
- Country of origin
- China
- Manufacturer
- UGREEN Group Limited
- Warranty
- Manufacturer warranty under UGREEN's terms. How claims work
Product attributes and shipping details
| Brand | UGREEN |
|---|
Downloads
Documentation
- UGREEN 50394 product pageOnline specifications · This model · ca.ugreen.comView official page
Series documents can differ from your exact model. Report a wrong or missing file
Questions about this product
Will it hold a 12.9 inch iPad?
Yes. The cradle opens from about 112 to 225 mm and the holder suits devices from about 4 to 12.9 inches.
How thick an edge can it clamp?
Up to about 52 mm.
Can I use it over the bed?
It clamps to a strong headboard, but never position the device directly above a person.
Does it charge the device?
No. It is a passive holder.
Ask about this modelSetup, compatibility, what is in the box
Answers are automated. Do not enter personal or account details.
Looking for an alternative?
We list alternatives only when we have checked they suit the same job. Compare other models in the category, or ask us to suggest one for your site.