UGREEN LP120 Spring Air-Vent Phone Holder (10422)

Overview

The UGREEN LP120 is a simple spring-clip holder for a car air vent that keeps a phone in view for navigation. Spring-loaded side arms open and close around the phone, and a 360° ball joint sets portrait or landscape. It suits phones of about 4.7 to 7.2 inches and 60 to 89 mm wide, under 11 mm thick with the case.

Is it right for you?

• Suits phones of about 4.7 to 7.2 inches, 60 to 89 mm wide and under 11 mm thick with the case. Measure the complete setup before ordering.
• Suits a firm, undamaged, straight horizontal vent blade up to about 4.5 mm thick.
• Not for vertical, round, turbine, curved, retractable, loose or fragile vents.
• A mechanical clip only: no charging, magnet, suction cup or dashboard adhesive. If you want magnetic attachment, a magnetic mount suits better.

Key features

• Spring-loaded side arms hold the phone.
• 360° ball joint for portrait or landscape positioning.
• Silicone-lined clip for the vent blade, with silicone pads where the phone rests.
• Engineered plastic body, metal-reinforced spring mechanism and aluminium alloy arm elements, in black and silver.
• Passive holder with no electronics.

What else you need

A phone within the size limits and a straight horizontal vent blade. A separate charging cable and car charger if you want to charge while driving.

Installation

Push the silicone-lined clip onto a straight horizontal vent blade, then open the arms and seat the phone.

Before you buy

• It has no MagSafe, wireless charging, battery, powered USB port or motor.
• The vent blade must be straight, horizontal and no thicker than about 4.5 mm.
• Silicone and soft pads reduce, but do not eliminate, the chance of marks on the phone or the surface.
• Not every phone case, vent or vehicle is compatible, and no holder is free of wobble on rough roads or at full extension.
• It is not safety equipment. Do not hang a device where a release could injure someone or cause serious damage.