UGREEN LP290 Magnetic Air Vent Car Phone Holder with 5× N52 Magnets and Metal Plates (80712B)

Overview

The UGREEN LP290 clips to a car air vent blade and holds a phone by magnet, so the phone goes on and comes off with one hand. A thin metal plate from the box sticks to the phone or its case. It suits phones of about 4.7 to 7.2 inches and up to about 300 g with case and plate, in cars with straight horizontal vent blades.

Is it right for you?

• Suits phones of about 4.7 to 7.2 inches in a thin or regular firm case with a flat area for the plate, up to about 300 g including phone, case and plate.
• Suits straight, horizontal, firm vent blades deep enough for the 19.8 mm prongs, with clearance around the holder and phone.
• Not for round or turbine-style vents, vertical-only blades, recessed, closely spaced or strongly curved vents, or loose, motorised or damaged vent assemblies.
• The holder angle is fixed, with no ball joint. If you want to tilt the phone, a holder with a ball joint suits better.

Key features

• Five N52 neodymium magnets hold the phone through the metal plate.
• Rectangular and round metal plates in the box, so you can choose the shape that fits your phone or case.
• Portrait or landscape by rotating the phone on the magnetic face.
• Aluminium alloy body with padded silicone and rubber faces, about 37 × 64.5 × 39 mm, in silver, grey and black.
• Passive holder: no charging and no electronics.

What else you need

A phone within the size and weight limits, with one of the included metal plates fixed to the phone or case. A separate charging cable and car charger if you want to charge while driving.

Installation

Stick the rectangular or round plate to a flat area on the phone or case, then push the prongs onto a straight horizontal vent blade. Snap the phone on and rotate it to portrait or landscape.

Before you buy

• The angle is fixed: there is no ball joint.
• It does not charge the phone and is not MagSafe certified.
• Check the vent before ordering: it needs straight, horizontal, firm blades deep enough for the 19.8 mm prongs.
• Phone, case and cables shown in photos are not included.