UGREEN LP845 MagSafe-Compatible Magnetic Car Phone Mount, Air Vent, 360° Adjustable (65764)

Overview

The UGREEN LP845 holds a MagSafe iPhone on a car air vent by magnet, so the phone snaps on and lifts off with one hand. A 20 magnet N52 array gives a stated holding force of up to 2,500 g, and a 360° ball joint sets the viewing angle. Other phones can use it with one of the two adhesive magnetic rings in the box.

Is it right for you?

• Suits iPhone 12 to iPhone 17 series and MagSafe cases with an integrated magnetic ring, which attach directly.
• Suits Samsung Galaxy, Google Pixel, OnePlus, Xiaomi, Redmi, Motorola, OPPO, vivo, realme and other phones, and non-MagSafe iPhones in suitable non-magnetic cases, with an adhesive ring fitted.
• Suits straight horizontal or vertical vent blades with enough space behind them for the metal hook.
• Not for round or turbine-style radial vents, vents with only two blades, recessed, curved or unusually thick blades, fragile, loose or cracked vents, or vents without rear clearance for the hook.
• A holder, not a charger.

Key features

• 20 N52 magnets with a stated force of about 18 to 23 N, up to 2,500 g holding force.
• 360° adjustable ball joint for portrait, landscape or any angle in between.
• Adjustable metal air vent hook.
• About 11 × 8.5 × 3.8 cm and about 110 g, in grey.
• No power, cable or pairing needed.

What else you need

A MagSafe iPhone or MagSafe case, or another phone with one of the supplied adhesive rings fitted. A separate charging cable and car charger if you want to charge while driving.

Installation

Hook the mount onto a straight vent blade with clearance behind it. A MagSafe-compatible iPhone or MagSafe case normally needs no ring. For another phone or case:

• Choose a clean, dry and flat area on the phone or case.
• Centre the ring around the phone’s wireless charging coil position where applicable.
• Remove the adhesive backing, position the ring carefully and press it evenly onto the surface.
• Allow the adhesive to settle as the supplied instructions describe before placing the phone on the holder.

Before you buy

• It does not charge the phone.
• Check the vent before ordering: it needs straight blades with rear clearance for the hook.