ZKTeco BOL2219-A Automatic Bollard

Overview

The ZKTeco BOL2219-A is a hydraulic rising bollard that stops unauthorised vehicles at an entrance. Its 219 mm stainless steel post rises 600 mm in 4 seconds, and one controller can raise or lower up to 8 bollards together so a whole entrance moves as one. It is used at customs posts, ports, prisons, military sites, government buildings and private estates where vehicle access has to be controlled.

Is it right for you?

• It suits an entrance that needs a hard vehicle stop with an 80 t weight load rating, rather than a boom barrier that only signals.
• It suits a row of up to 8 bollards on one controller.
• If you need a higher impact rating or faster rise, the BOL1219-A is rated 120 t and 3 seconds.
• It needs civil works: each bollard sits in a pit about 400 mm in diameter and 1,105 mm deep, with drainage and ducting.

Key features

• Hydraulic drive, raising and lowering in 4 seconds.
• 80 t weight load rating.
• SUS304 stainless steel post with a 6 mm wall, on an A3 steel underground housing.
• IP68 ingress protection for the buried unit.
• LED bar to warn drivers at night.
• Manual lowering with a 12 V DC battery during a power cut, so vehicles are not trapped.
• Controller for up to 8 bollards; bollard remote range 100 m and LED remote range 30 m.
• Works from -20 to 55 °C. Each bollard weighs 90 kg; a pair ships at 193 kg.

What else you need

• The controller, 600 × 500 × 200 mm, which drives up to 8 bollards.
• Mains power at 110 or 220 V AC, 350 W working power.
• Civil works: the pit, drainage and ducting for each bollard.
• A control method: a biometric reader, remote control or push button station.
• A 12 V DC battery for emergency lowering.

Installation

This is a civil and electrical job for a barrier installer. Each bollard needs a round pit of about 400 mm diameter by 1,105 mm deep with drainage and ducting back to the controller, then mains wiring, hydraulic commissioning and connection of the chosen control method.

Before you buy

• Plan the pit, drainage, ducting and mains supply before ordering.
• Choose between this model and the BOL1219-A by impact rating (80 t or 120 t) and speed (4 or 3 seconds).
• Tell us how many bollards the entrance needs and how they will be controlled.