ZKTeco CMP200 Automatic Boom Barrier

Overview

The ZKTeco CMP200 is a lower-cost automatic boom barrier for everyday car parks at offices, apartment buildings, shops and small campuses. A telescopic straight boom of 4.5 or 6 m covers the lane, and LEDs built into the silver steel housing show the barrier state like a traffic light. It opens for a number plate camera, a long-range reader or the 430 MHz remote control.

Is it right for you?

• It suits a standard car park lane where a telescopic boom is enough and budget matters.
• It uses an AC motor, unlike the brushless DC motors in the BGM and BG ranges, which carry higher cycle ratings; for a very busy gate look at those.
• It is rated -25 to 75 °C for outdoor use.
• The boom direction can be changed between left and right on site, so handing does not need deciding at order stage.

Key features

• Opening or closing in 3 seconds with a 4.5 m boom, or 6 seconds with a 6 m boom.
• Telescopic boom in aluminium and wood: 3.5 kg at 4.5 m or 4.5 kg at 6 m (packed at 2.8 m or 3.6 m).
• Built-in traffic light LEDs on the housing.
• Anti-smash and automatic closing with an infrared detector, loop detector or radar.
• Opening angle of 90 degrees plus or minus 2 degrees, with over voltage protection.
• Works with number plate recognition (LPR) cameras and Ultra High Frequency (UHF) reader controllers; 430 MHz remote control up to 30 m.
• Cold rolled steel housing of 350 x 280 x 1,010 mm, 45 kg; 100 W (120 W maximum) from 110 or 220 V AC.

What else you need

110 or 220 V AC power at the gate. A safety detector (infrared, loop or radar) so the boom does not close on a vehicle, and an access trigger such as a number plate camera or UHF readers.

Installation

A gate automation installer should fit it. The job involves a foundation for the 45 kg housing, mains power, the safety detector, the trigger device, fitting the telescopic boom and setting the arm direction for the lane.

Before you buy

• Choose the 4.5 m or 6 m boom to suit the lane; the longer boom cycles in 6 seconds rather than 3.
• AC motor drive: for continuous heavy duty, the brushless DC BGM range carries higher cycle ratings.