ZKTeco FBL320 Flap Barrier

Overview

The ZKTeco FBL320 is the extra lane cabinet for the FBL300 flap barrier. Set beside an FBL300, it forms a second controlled lane, and more FBL320 units widen the entrance to as many lanes as a corporate lobby, factory, hospital or campus needs at peak times.

It uses the same 1,400 mm SUS304 stainless steel cabinet with retracting acrylic flaps and five pairs of infrared sensors, so every lane in the line looks and behaves the same.

Is it right for you?

• Suits an entrance that has, or is being fitted with, an FBL300 and needs several matching lanes.
• It cannot form a lane on its own. For a single lane, order the FBL300 instead.
• It is a medium security barrier for staffed or camera-monitored entrances, not an unattended perimeter.
• It can be used outdoors only under shelter.

Key features

• Up to 35 people per minute per lane.
• Five pairs of infrared sensors detect each passage, which helps stop tailgating.
• 570 mm lane width, with a cabinet of 1,400 x 300 x 980 mm.
• SUS304 stainless steel cabinet with a steel lid and retracting acrylic flaps.
• LED indicators show which way the lane is open.
• Runs on 100 to 120 V or 200 to 240 V AC at 50 or 60 Hz, and works from -20 to 70 °C at 5 to 95% humidity, non-condensing.

What else you need

An FBL300 as the end cabinet of the line, since the FBL320 is an add-on unit.

A Radio Frequency Identification (RFID) card or fingerprint reader for each lane, an access controller or management software, and mains power and cable ducts for every cabinet.

Installation

A turnstile installer should fit it. The job involves fixing each cabinet to a level floor, running power and reader cabling to every cabinet through floor ducts, and setting the lane direction and reader logic with the controller.

Before you buy

• Confirm the number of lanes and the cabinet layout with us before ordering, so the right mix of FBL300 and FBL320 units is supplied.
• Outdoor installation needs shelter from rain and direct weather.