ZKTeco LH6000 Hotel Door Lock

Overview

What it is

The ZKTeco LH6000 is a standalone hotel door lock that opens with 13.56 MHz MIFARE key cards (S50 1 KB or S70 4 KB). It has a zinc alloy handle set and an American standard mortise with five latches, and runs on batteries, so no wiring to the door is needed.

What it is used for

It is fitted to guest room doors in hotels, resorts, serviced apartments, hostels and guest houses, where reception issues a card for each stay that expires at checkout.

Key features

• Reads ISO 14443 Type-A MIFARE S50 and S70 cards
• Stores up to 224 audit trail records for investigating room entries
• American standard mortise with 5 latches
• Fits doors 35 to 55 mm thick
• Powered by four AA alkaline batteries (not included), with warning beeps when power is low
• Mechanical keys supplied for manual unlocking

Buying considerations

As a standalone lock, it is programmed through cards written at the front desk rather than over a network, so room status is not monitored live. Measure door thickness and check whether the door is prepared for an American standard mortise before ordering. Use alkaline batteries only; rechargeable cells are not recommended by the manufacturer.

Compatibility and what you need

You need ZKTeco hotel lock management software (ZKBiolock Hotel Lock System or ZKBioSecurity 3.0) with a card encoder at reception, MIFARE S50 or S70 key cards, and AA alkaline batteries for each lock.