ZKTeco Mars-S100 Swing Barrier Turnstile

Overview

The ZKTeco Mars-S100 is a compact swing barrier for lobbies, reception areas and gyms where there is little floor space in front of the lifts or doors. Its cabinet is only 600 mm long, and its acrylic wings stay locked across the lane until a reader accepts a card, fingerprint or face, then swing open for one person.

An optional 900 mm lane makes room for wheelchair users and people with trolleys.

Is it right for you?

• Suits a tight lobby where a full length flap barrier cabinet will not fit.
• Choose the 900 mm lane option if the lane must take wheelchairs or trolleys; the standard lane is 660 mm.
• The standard SPCC steel finish suits indoor lobbies. Choose the SUS304 stainless steel option for areas that need more corrosion resistance.
• It is a guidance and control barrier for supervised entrances, not a high security barrier.

Key features

• Cabinet of 600 x 120 x 1,020 mm, with a lane width of 660 mm or 900 mm.
• Brushless motor with a mean cycles between failures (MCBF) rating of 5 million.
• Four pairs of infrared sensors track the person through the lane.
• A built-in clutch resists forced opening, and the wings open automatically in an emergency.
• Up to 25 people per minute with credentials, with noise under 60 dB.
• SPCC cold rolled steel cabinet and lid as standard, SUS304 stainless steel optional, and LED indicators.
• 50 W running and 22 W on standby, from 100 to 120 V or 200 to 240 V AC at 50 or 60 Hz.
• Works from -28 to 60 °C at 5 to 80% humidity.

What else you need

Readers or a face terminal for the chosen credential, an access controller and management software, mains power and cable ducts between cabinets.

Installation

A turnstile installer should fit it. The job involves fixing the cabinets to a level floor, running power and reader cabling through ducts, and setting the lane direction and reader logic with the controller. The unit ships in two wooden cases, 762 x 362 x 1,215 mm each, with a net weight of about 50 kg.

Before you buy

• Credential options (RFID cards, QR code, fingerprint or face) are chosen per project, so specify them when ordering.
• Specify the lane width, 660 mm or 900 mm, and the cabinet finish, SPCC or SUS304.