ZKTeco MiniAC Face Recognition Access Control and Video Door Phone

Overview

The ZKTeco MiniAC is a slim door terminal with a video door phone built in, for flats, offices, main doors and gates where the entry point also needs to call someone inside. It opens by face, card or password on a 4.3-inch touch screen, fits a single or Asian gang box, and its IP65 housing stands up to dust and rain. A built-in backup battery keeps it running through a short power cut.

Is it right for you?

• It suits a single door or gate that needs face entry and a visitor intercom from one slim unit, paired with an indoor monitor.
• It holds 1,500 users, 1,500 faces and 1,500 cards, which covers a block of flats or a mid-sized office, not a large factory.
• IP65 rated, so it can sit on an outer door under cover. It works from -5 to 45 °C.
• It does not read fingerprints.

Key features

• Recognises a face in under 0.35 seconds at 30 to 200 cm on the ZKFace V4.0 algorithm, with anti-spoofing that rejects photo and video attacks.
• Stated false acceptance rate (FAR) under 0.01% and false rejection rate (FRR) under 0.02%, on a 1 MP wide dynamic range (WDR) binocular camera.
• HD video door phone over SIP version 2.0 or the ZKTeco protocol, with ONVIF support.
• 4.3-inch colour touch screen (272 × 480) with a virtual keypad for passwords up to 8 digits.
• Reads 125 kHz ID cards as standard; 13.56 MHz IC cards and a wireless doorbell are options.
• Stores 200,000 transactions, with anti-passback, access levels, groups, holidays, photo capture and a tamper switch alarm.
• 2000 mAh lithium backup battery, AES256 and TLS 1.2 encryption, and a switch between AC Push and TA Push for access control or attendance software.
• Wiegand in or out, ZKTeco RS485 for a second reader, wired TCP/IP and 2.4 GHz Wi-Fi. User data copies between devices on a FAT32 USB drive.

What else you need

• A 12 V DC 3 A supply.
• An electric lock, a door sensor (door position sensor) and an exit button, which wire to the terminal.
• An indoor monitor, only if you want the door phone function: VT07-B01 or VT07-B01-W on the ZKTeco protocol, VT07-B22L or VT07-B26L-W on SIP.
• The optional IC card module, only if you use 13.56 MHz cards.

Installation

An access control installer should fit it. The terminal is 175 × 84.5 × 21.65 mm and wall mounts over a single or Asian gang box. The work covers the lock, door sensor, exit button, auxiliary input and 12 V output wiring, the network or Wi-Fi link, and pairing with the indoor monitor and software.

Software and licences

On premise it works with ZKBio CVSecurity (AC Push) and easy TimePro (TA Push). In the cloud it works with BioTime Cloud 2.0 and ZKBio Zlink, with the ZKBio Zlink and ZKBio Zexus mobile apps. Management is over HTTPS or SSH.

Before you buy

• It has no fingerprint sensor.
• Tell us the lock type, whether you need the IC card module or wireless doorbell, and which indoor monitor you will pair.
• The door phone needs a compatible indoor monitor; the terminal alone is not an intercom.