ZKTeco MR1010 / MR1020 IP66 Vandal-Resistant RFID Card Reader

Overview

The ZKTeco MR1010 and MR1020 are metal-cased RFID card readers rated IK10 for vandal resistance and IP66 against dust and water, which suits them to outdoor gates, perimeter doors, parking entries and other exposed card points. The MR1010 works at 125 kHz and the MR1020 at 13.56 MHz, and both pass card data to an access control panel over Wiegand.

• IK10 vandal resistance and IP66 rating (dust-tight, protected against powerful water jets) for installation outside
• Metal casing for use in harsh environments
• Reads EM cards and S50 and S70 cards, at 125 kHz or 13.56 MHz depending on the model
• Wiegand output in 26-bit or 34-bit format for connection to third party panels
• Card reading distance of 2 to 6 cm
• Wide 9 to 24 V DC input with operating current of 50 mA or less
• Rated from -40 °C to 60 °C and 20% to 80% humidity, covering cold and hot site conditions
• Compact 105 × 49 × 21 mm body at 240 g

The datasheet does not name any software platform or controller family for this reader, so plan it against whichever access control panel you are using that accepts 26-bit or 34-bit Wiegand input.

A controller, cabling and a 9 to 24 V DC supply are needed to complete the installation, and cards or tags are ordered separately. Tell us which card frequency your existing credentials use, since MR1010 and MR1020 are two different models, and we will quote the matching one.