ZKTeco mTS1000 Tripod Turnstile

Overview

The ZKTeco mTS1000 is a compact pedestal style tripod turnstile for tight entrances such as gyms, small offices, canteens, clubs and school gates, where a bridge type tripod would take too much space. Its base is only 250 x 138 mm, it passes people in both directions, and the arm drops when the power is lost.

The housing is SUS304 stainless steel (SUS316 optional) with an acrylic lid and stainless steel arms.

Is it right for you?

• Suits a narrow entrance where floor space is the main constraint.
• It is a medium security barrier for staffed or camera-monitored areas, not an unattended perimeter.
• The 478 mm lane does not suit wheelchairs or goods, so provide a separate gate for them.
• Because it takes a dry contact signal, it can be driven by ZKTeco or third-party controllers and readers.

Key features

• Footprint of 250 x 138 mm, overall 798 x 750 x 950 mm, net weight 35 kg.
• Up to 25 people per minute with Radio Frequency Identification (RFID) cards, or 20 with fingerprint.
• Lane width and arm length of 478 mm.
• Two way passage, with arm drop for emergency exit when the power is off.
• LED pictograms show which way is open.
• Controlled by a dry contact input from any access controller.
• 40 W running and 10 W on standby, from 110 or 220 V AC at 50 or 60 Hz; works from -28 to 60 °C at 5 to 80% humidity.
• CE and FCC certified.

What else you need

An access controller and readers, from ZKTeco or another maker, giving a dry contact signal to the turnstile. Mains power at the turnstile.

Optional accessories: a card collection box, a remote control and a QR reader.

Installation

A turnstile installer should fit it. The job involves fixing the pedestal to a level floor, running power and controller cabling to it, and wiring the dry contact inputs for each direction.

Before you buy

• Tell us if you need the SUS316 housing option, or the card box, remote control or QR reader.
• Provide a separate gate for wheelchairs and goods.