ZKTeco SA32-E/SA32-M Standalone Card and PIN Access Control Reader

Overview

The SA32-E/SA32-M is a single door standalone access control device that reads a contactless smart card, a PIN, or both together. The datasheet lists no network interface, so it suits residential housing, offices and public facilities where a reader and keypad at the door is all the site needs.

• Three verification modes: card only, PIN only, or card and PIN.
• Storage for 1,000 users on the device.
• Reads EM (ID) cards, with IC cards offered as an alternative.
• Card reading distance of 1 cm to 15 cm.
• One relay output and one PUSH (low) output for the lock and an external device.
• One door button port and one doorbell port.
• Runs on DC 12 V with operating current under 100 mA.
• Rated for 0 °C to 60 °C ambient temperature and 20% to 80% relative humidity.

The datasheet names no management software or controller platform for this device, so treat it as a self-contained door unit rather than a component of a networked access control system.

To complete an installation you will need a DC 12 V supply, a lock, an exit button, a doorbell if you want one, and the cards themselves. Tell us which card technology you already use, EM or IC, and we will confirm the correct variant and quote it for you.