ZKTeco SF1005 IP65 Fingerprint and Card Access Control Terminal

Overview

The ZKTeco SF1005 opens a door and records attendance by fingerprint, card or keypad, from one wall unit with a 2.4-inch colour screen. Its IP65 housing and Power over Ethernet (PoE) suit an outer door where running a separate power cable is awkward, and it connects to on-premise software or to the cloud. It suits small and medium workplaces that want door control and attendance records in one place.

Is it right for you?

• It suits a door with up to 3,000 users, 3,000 fingerprints and 3,000 cards.
• It suits an outer door: IP65 rated and -10 to 55 °C.
• It suits a door with only a network cable, since PoE to IEEE 802.3at powers it.
• It has a physical keypad rather than a touch screen, which suits gloved or wet hands.
• It does not read faces.

Key features

• Fingerprint match in under 0.5 seconds on ZKFingerprint V13.0 (V10.0 optional), with a stated FAR (false acceptance rate) of 0.0001% or less and FRR (false rejection rate) of 0.01% or less.
• 17-key physical keypad for 6 to 8 digit passwords, and a 2.4-inch colour screen (240 × 320).
• Reads 125 kHz ID cards as standard; 13.56 MHz IC cards and a multi-tech module adding DESFire EV1 and EV2 are options.
• Wired TCP/IP plus 2.4 GHz Wi-Fi in two modes: AP mode broadcasts a hotspot for setup from an app or laptop without a network, and client mode joins your existing Wi-Fi.
• Powered by 12 V DC 1.5 A or PoE (IEEE 802.3at).
• Wiegand, ZKTeco RS485 for a second reader, USB drive port, and terminals for an electric lock, door sensor, exit button, alarm, doorbell and a 12 V output.
• 200,000 transactions, access levels, groups, holidays, anti-passback, schedule bell, tamper switch alarm, web server and a safety relay board (SRB) for secure lock control.
• AES256 and TLS 1.2 encryption, HTTPS or SSH backend access, and a switch between AC Push and TA Push.

What else you need

• Either a 12 V DC 1.5 A supply or an 802.3at PoE switch port.
• An electric lock, an exit button and a door sensor (door position sensor).
• The IC card or multi-tech module, only if your cards are not 125 kHz ID.
• A second RS485 reader, only if you want reading on both sides of the door.

Installation

An access control installer should fit it. The unit is 205.7 × 82.7 × 33 mm and wall mounts over an Asian or single gang box; it is also compatible with the Rots-3 stand and Rots-02 bracket. The work covers the lock, door sensor, exit button, alarm and doorbell wiring and the network or PoE cable.

Software and licences

Works with ZKBio CVSecurity, easy TimePro and Bio TimeCloud 2.0 on premise, and with ZKBio Zlink in the cloud through its web portal and mobile app. The default BEST protocol can be converted manually to PUSH.

Before you buy

• The IC card module, multi-tech module and wireless doorbell are options to confirm when ordering.
• For a quote, tell us your door count and card type.