ZKTeco TS200 Pro Tripod Turnstile

Overview

The ZKTeco TS200 Pro is a two way tripod turnstile for staff entrances, factories, canteens, schools and gyms that need people counted and controlled one by one in both directions. LED pictograms show which direction is open, the arms drop for emergency exit, and the readers are fitted and tested at the factory before shipping.

The cabinet, lid and arms are SUS304 stainless steel.

Is it right for you?

• Suits a supervised entrance that wants a barrier and reader delivered as one tested unit at a modest cost.
• It is a medium security barrier for staffed or camera-monitored areas, not an unattended perimeter.
• The 580 mm lane does not suit wheelchairs or goods, so provide a separate gate for them.
• It can be used outdoors only under shelter.

Key features

• Up to 30 people per minute through a 580 mm lane.
• Cabinet of 1,200 x 280 x 980 mm in SUS304 stainless steel.
• Arm drop function and emergency mode, so people can leave in an emergency.
• Anti-tailgating support and LED pictograms for both directions.
• Mean cycles between failures (MCBF) of 2 million cycles, with low power consumption.
• Runs on 110 or 220 V AC at 50 or 60 Hz, and works from -28 to 60 °C at 5 to 80% humidity.

What else you need

Access control software, mains power at the turnstile, and floor fixing on a level base.

Installation

A turnstile installer should fit it. The job involves fixing the cabinet to a level base, running power and network cabling, and setting the direction modes. The readers are already fitted and tested, which shortens the work on site.

Before you buy

• Specify the reader type when ordering so it can be integrated and tested before dispatch.
• Outdoor installation needs shelter from rain and direct weather.
• Provide a separate gate for wheelchairs and goods.