ZKTeco TS2000 Plus Tripod Turnstile

Overview

The ZKTeco TS2000 Plus is a bridge type tripod turnstile for staff entrances, factories, schools, canteens, gyms and transport facilities where people pass one at a time with a card, QR code or fingerprint. The verification area on top is designed for streamlined under-mount card and QR code readers, giving a clean finish without readers sticking out of the lid.

The cabinet, lid and arms are SUS304 stainless steel, and the arm drops automatically when the power is lost.

Is it right for you?

• Suits a sheltered entrance that wants a tidy, flush reader finish on a tripod.
• It is a medium security barrier for staffed or camera-monitored areas, not an unattended perimeter.
• The 550 mm lane does not suit wheelchairs or goods, so provide a separate gate for them.
• It can be used outdoors only under shelter. Choose the SUS316 cabinet and lid option for harsher conditions.

Key features

• Up to 25 people per minute through a 550 mm lane.
• IPX4 rated and works from -20 to 70 °C at 20 to 80% humidity, non-condensing.
• Under-mount readers: Pro ID or KR series Radio Frequency Identification (RFID) readers, or FR1200 or FR1500 fingerprint readers; KR800E and FR1500S lid options.
• The arm drops automatically on power loss, and a voltage free fire alarm input releases it on an alarm.
• Anti-tailgating, LED status lights (green for normal use, red for closed) and an internal buzzer.
• Mean cycles between failures (MCBF) of 2 million cycles, and a mean time to repair (MTTR) under 60 minutes.
• 10 VA on standby and 40 VA in operation, from 110 or 220 V AC at 50 to 60 Hz; noise under 65 dB.
• Pre-assembled, 30 kg, on a footprint of 260 x 1,110 mm; CE, FCC and ISO 9001 listed, with UKCA pending.

What else you need

An access controller, since none is included: a ZKTeco C3-200, InBio 260 Pro or a third-party controller.

Readers, mains power at the turnstile, and ZKBio CVSecurity software. Wired or wireless remote control, a QR reader, a counter and a SUS316 cabinet and lid are optional.

Installation

A turnstile installer should fit it. It needs a flat, level finished floor. The job involves fixing the pre-assembled unit, running power, controller and fire alarm cabling, fitting the under-mount readers, and setting the door open duration and access mode on the motherboard.

Software and licences

Managed in ZKBio CVSecurity, which works when the turnstile is connected through the access control panel.

Before you buy

• A controller is not included, so order a C3-200, InBio 260 Pro or third-party controller with it.
• Tell us which readers and options you want: counter, SUS316 cabinet and lid, or remote control.
• Outdoor use needs shelter, and a separate gate is needed for wheelchairs and goods.