ZKTeco ZK-D1065L Walk-Through Metal Detector

Overview

The ZKTeco ZK-D1065L is a walk-through metal detector, also called a door frame metal detector (DFMD), with 6 detection zones. It screens people for concealed metal weapons such as knives and guns as they pass through the arch and shows the zone where metal was detected. It is used at prisons, courthouses, government buildings, exhibition centres, banks, hotels and factories, including electronics, food and cigar manufacturing where item theft is a concern.

Is it right for you?

• It suits a checkpoint that needs a rough position of the metal rather than a plain alarm.
• It responds more strongly to magnetic metals than to non-magnetic ones, so set the sensitivity to the threat you are screening for.
• It is slimmer than the ZK-D1065: the frame is 2,230 mm high, 810 mm wide and 300 mm deep, and it weighs 33 kg.

Key features

• 6 detection zones, each with 100 adjustable sensitivity levels.
• 3.5-inch LCD display.
• People counting and alarm counting.
• 85 dB alarm.
• Fire-retardant materials and a waterproof base.
• Anti-interference design, harmless to the human body.
• Working frequency 5.7 to 9.6 kHz; 12 V DC internally from 100 to 240 V AC mains, 20 W.

What else you need

A 100 to 240 V AC mains socket. It runs on its own with no software. A hand-held metal detector for secondary checks.

Installation

A security equipment installer should fit and commission it. The door panels and control unit are packed separately and assembled in the doorway; connect mains power and set the zone sensitivities on site. Rated -20 to 55 °C and under 95% non-condensing humidity.

Before you buy

• Check doorway height and floor space against the 2,230 x 810 x 300 mm frame.
• Set sensitivity for the metals you need to find; it is more sensitive to magnetic metals.