Benincà BISON35 OTI Industrial Sliding Gate Operator, 400 V, Gates up to 3500 kg, Inverter

Overview

The Benincà BISON35 OTI is an industrial operator for very heavy sliding gates, with the control unit and radio receiver built in. An inverter ramps the motor speed up and down at each end of travel, which reduces wear and improves anti-crush safety.

Is it right for you?

It suits factories, warehouses, logistics yards and other large sites with sliding gates up to 3,500 kg in intensive use. For a gate up to 4,500 kg, choose the BISON45 OTI.

Key features

• Maximum thrust 3000 N
• Opening speed from 19 m/min on gates up to 850 kg, falling to 10 m/min at 3,500 kg
• Motor supply 400 V AC, maximum current 3 A
• Inverter for gradual acceleration and slow-down
• Encoder for precise gate positioning
• Self-ventilated motor, full metal mechanics, oil lubrication
• Built-in FTC.S photocells available as an option
• Protection rating IP44, works from -20 to 50 °C

What else you need

• A 400 V AC three-phase supply, 50/60 Hz, at the gate
• An M6 rack, for example RI.M6Z (drive pinion M6 Z13)
• The BISON.P35 foundation plate and a concrete base
• Photocells, a flashing light and remotes

Installation

This is an industrial installation. A trained installer should size the rack, foundation and safety devices for the gate.

Before you buy

• The foundation plate (BISON.P35) and the rack are not included
• Opening speed falls as gate weight rises; check the speed you need against your gate weight